jacking point cover

[morgus]

having trouble getting this little baarstard to clip back into place , all the grovves and lugs line up but it just won't snap tight . Anybody got a DIY method for solving this without screwing the thing through the bottom ?

 

[33754k]

Search the forum
Basically loosen the skirt, by removing screws near the clip that you need to refit.... then it is easy to refit

 

[Empi5]

it may sound radicial, put a soft shoe on , and kick it dead centre. I did , mostly out of frustration, and it went straight back on.

 

[simonac84]

get a screw driver and push the clip on the car back a bit not to much and then put some washing up liquid or any lub and it will clip in with no trouble.

 

[lairdie]

jack point cover

i had the same problem this weekend all i dids was got a screw driver cleaned all the lugs holls where they slot put it back in place and gave it thump and it went back in ok

 

[Al_G]

Give it a whack with your fist, thats what I did

 

[jok0212]

yeah had the same problem before, just push the side skirt down and whack the cover on.

i was about to take the hammer at it

 

[Deleted member 20376]

i had this problem just clean the clips and where it hooks onto slips straight on there. they will be full of **** from the roads