How do I use VAG-Com to check that these are enabled - and enable them if they are not. I am using ver 303-1
Cheers
Cheers
http://www.seatcupra.net/forums/showthread.php?t=57387&highlight=vag-com+alarm+enable
hi mate. that post might help. IIRC, you go into modules and select central conv. Then in there its one of the earlier settings - if you just scroll through 1 at a time it lists what each does - if u dont recognise the name then dont touch it. You should see an auto lock/delock settings and then alarm settings....
Here are the instructions from my site to enable autolock/delock - the alarm chirp and alarm sensors are in the same place i think:
Open Up VAG-COM, and goto "Select Control Module"
Select module 46 - "Central Convenience"
In the Advanced Options section, click on Adaptation - 10
Open Channel 3, change the value from 0 to 1 and save
Open Channel 4, change the value from 0 to 1 and then save.
Close the controller, and close VAG-COM.
Take your key out of the ignition - You should hear your doorlocks open (or try to if they already are)
hi mate. that post might help. IIRC, you go into modules and select central conv. Then in there its one of the earlier settings - if you just scroll through 1 at a time it lists what each does - if u dont recognise the name then dont touch it. You should see an auto lock/delock settings and then alarm settings....
Here are the instructions from my site to enable autolock/delock - the alarm chirp and alarm sensors are in the same place i think:
Open Up VAG-COM, and goto "Select Control Module"
Select module 46 - "Central Convenience"
In the Advanced Options section, click on Adaptation - 10
Open Channel 3, change the value from 0 to 1 and save
Open Channel 4, change the value from 0 to 1 and then save.
Close the controller, and close VAG-COM.
Take your key out of the ignition - You should hear your doorlocks open (or try to if they already are)
i think thats right anyway mate - have a check yourself. Just dont change anything if you are unsure.
Hope it helps anyway!
Hope it helps anyway!
wicked - there you go mate - channel 5's the one you want 
Two values are 0 and 1. (zero being off and 1 being on i think)
Two values are 0 and 1. (zero being off and 1 being on i think)
Similar threads
