Mk3 Cupra Logs

[Jordan20vt]

Hi,

Did some logging yesterday, can someone have a look and see if it's possible to run more timing?

Thanks

	Group A:	'020				Group B:	'011				Group C:	'002			
		Idle Stabilization	Idle Stabilization	Idle Stabilization	Idle Stabilization		RPM	Temperature	Temperature	Ign. Timing		RPM	Load	Inj. On Time	Mass Flow
	TIME					TIME					TIME				
Marker	STAMP	 CF	 CF	 CF	 CF	STAMP	 /min	°C	°C	 °BTDC	STAMP	 /min	%	 ms	 g/s
	0.91	0	0	0	0	0	1480	87	26	11.3	0.4	1240	16.5	2.46	7.61
	2.3	0	0	0	0	1.31	1160	87	26	21.8	1.81	1240	40.6	4.92	9.25
	3.5	0	0	0	0	2.7	1320	87	26	24	3.1	1360	24.1	2.46	4.25
	4.7	0	0	0	0	3.9	1360	87	26	27.8	4.3	1400	39.8	5.74	11.19
	5.9	0	0	0	0	5.1	1480	87	26	20.3	5.5	1520	72.9	9.43	22.78
	7.1	0	0	0	0	6.3	1640	87	24	15.8	6.7	1720	81.2	10.66	28.03
	8.3	0	0	0	0	7.5	1800	87	23	11.3	7.9	1880	89.5	11.48	33.08
	9.5	0	0	0	0	8.7	2000	87	21	9.8	9.1	2120	118.8	14.35	51.14
	10.8	0	0	0	0	9.9	2320	87	21	9	10.4	2480	145.1	18.04	73.14
	12.09	0	0	0	0	11.2	2800	87	21	5.3	11.6	3000	186.5	23.37	108.94
	13.39	0	0	0	0	12.49	3440	87	23	6	13.01	3720	184.2	24.6	127.64
	14.59	0	0	0	0	13.79	4040	87	24	6.8	14.19	4200	181.2	25.42	143.22
	15.79	0	0	0	0	14.99	4520	87	26	7.5	15.39	4640	171.4	25.01	151.06
	16.99	0	0	0	0	16.19	4920	87	27	6.8	16.59	5040	162.4	23.78	155.06
	18.19	0	0	0	0	17.39	5280	87	29	6	17.79	5360	154.9	23.37	160.14
	19.5	0	0	0	0	18.59	5560	88	30	6.8	19	5680	143.6	22.14	154.53
	20.7	0	0	0	0	19.9	5920	88	31	12	20.3	6000	136.8	21.73	155.61
	21.9	0	0	0	0	21.1	6200	88	32	13.5	21.5	6280	131.6	21.32	157.56
	23.1	0	0	0	0	22.3	6440	88	32	14.3	22.7	6520	127.1	20.5	157.81
	24.3	0	0	0	0	23.48	6640	88	33	15	23.9	6720	123.3	19.68	157.89
	25.5	0	0	0	3	24.7	6840	89	33	17.3	25.1	6920	119.5	18.86	157.56
	26.89	0	0	0	0	26	7040	90	33	21.8	26.4	6800	15.8	1.64	0
	28.09	0	0	0	0	27.29	6640	90	30	27	27.69	6440	10.5	0	13.78
	29.4	0	0	0	0	28.49	5960	90	31	16.5	29	5680	10.5	0	11.94
	30.68	0	0	0	0	29.88	5160	90	31	14.3	30.28	4880	9.8	0	9.64
	31.88	0	0	0	0	31.08	4360	90	30	13.5	31.48	4120	9.8	0	8.19
	33.19	0	0	0	0	32.39	3560	90	30	13.5	32.79	3320	9.8	0	6.33
	34.49	0	0	0	0	33.69	2680	90	30	13.5	34.09	2400	10.5	0	4.86

 

[PhilW]

Can you post them again using the CODE button please? Makes them a lot easier to read.

 

[PhilW]

Select the figures in excel and copy them, and paste them like you done above in the CODE feature.

 

[Jordan20vt]

Ah ha i've done it, had to switch computers as no excel on the laptop!

 

[PhilW]

Looks good to me.

Any 114, 115 and 118 logs?

 

[Damoegan]

Do you have any different ones?

003 and 020
115 and 031
118 and 032
002 and 114

 

[Jordan20vt]

not at the minute, first time me and Spanny (banned) have done it.

We're gonna do some more at the weekend, so i'll log the blocks you've asked for.

But do you think it looks healthy?