ahh.. now there's one.
was thinking the wood below was a pallet as a size reference but not so if this is a brake pack plate for adding a duct to.
-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
ahh.. now there's one.
was thinking the wood below was a pallet as a size reference but not so if this is a brake pack plate for adding a duct to.
Correctamundo
Waiting for the glue thats holding it together to fully cure then fill/smooth the joints before a layer of glossy paint
Waiting for the glue thats holding it together to fully cure then fill/smooth the joints before a layer of glossy paint
That's what i thought too, but didn't want to look stupid if i got it wrong
Looks good though Stu.
if there is an air scoop nearby to force / direct the air into that cooler then it'll be really efficient, not just heat radiating away, more air being forced onto the disc
The actual wooden shape isnt going on the car - its a buck to which I will lay fibreglass on and use that
§ace§
Guest
This afternoons work using 2 part wood filler - good stuff to wook with better than P38, doing the other side after tea
there are 2 bolt holes in the bottom of the hub as a std cooling plate does fit there. this one is just an improved version
Two m6 bolts that hold the existing shroud on plus an additional bracket that will come off the top caliper bolt and another off the strut bolt,
ahh right now i see said the blind man talking to the deaf dog! sorry for the lack of knowledge and thanks for explaining
Similar threads
- Locked
