New FMIC and a couple of nice pics

[Cowie]

Just spotted thus, nice neat job there Cowie, any additional lag from it? How are the IAT's doing from the extra cooling?

Hi mate, possibly a touch more lag, IAT's dropped big time from around 50 down to high teens

Am not totally happy with the pipework routing and going to change some of the metal elbows over for silicon

 

[Cowie]

If it is toyo that cowie's bought the size is 420x160x85 with 64mm inlet/outlet

nope mate was this one
http://cgi.ebay.co.uk/Medium-FMIC-t...arts_Vehicles_CarParts_SM&hash=item336251af2c

620 x 230 x 65 63MM outlets

 

[SalSheikh]

hi mate i got the forge map sensor pipe,which is way too long,i cut it down to around 5-6 inch long and fitted it below the hose that goes to the throttle body, just and so had enough play on the map sensor wiring to manage to do it,so its basically behind the wheel arch cover,think when this shitty weather goes am gonna take bumper off and replace a couple of the metal elbows with silicone to give a little more flex in the pipework, a couple of the bends were really tight together with the metal ones and i dont think i have the best fit possible really.

i too used this and cut it down. one pic on this thread : http://www.seatcupra.net/forums/showthread.php?t=288914

bit of a PITA to get it all to fit due to lack of space.

for all you guys thinking of getting one - i would buy one of the smaller twin pass coolers that are available to be honest, might give you some working space as mine was way too big.