New too the forum and the proud owner of a cupra r 225,

[D.K]

i think im going to try the smoothbox and panel filter for the moment, lokks like a really good idea, not 2 sure on the drilled holes though what do you think?

If you want a nice induction note then drill a few holes in it (51 in mine )
AmD's map is very good most of my mods are below and the power figures.

 

[TimJK]

Personally wouldnt bother putting in holes, as it gives more noise but just provides loads and loads of heatsoak.

 

[strugers1]

anti roll bars mate the best handling mod by far
power is nothing without control
p- torque do get good and reliable gains from maps
good customer service too i dealt with them of late and cant fault them one bit

 

[strugers1]

Personally wouldnt bother putting in holes, as it gives more noise but just provides loads and loads of heatsoak.

its ok to drill the wing side matey

 

[jack-cuprar]

cheers rich,
and what wipers would you recommend tim?
thanks

 

[D.K]

Personally wouldnt bother putting in holes, as it gives more noise but just provides loads and loads of heatsoak.

Thats what the intercoolers are for mate

 

[MrBen2k7]

cheers rich,
and what wipers would you recommend tim?
thanks

Fabia ones look pretty decent, and are an easy straight swap

 

[strugers1]

mk 5 golf gti on mine

 

[jack-cuprar]

cool will have too look into the arms, has anyone had a remap off custom-code on here?
thanks for the help lads

 

[TimJK]

I have a fabia rear and mk4 golf front aero arms and blades.

but still just wouldnt drill my air box, its designed to keep heat out, and drilling holes just draws in warm air.

 

[CupraMVR]

Welcome pal i know you will love your new toy

 

[stucupra r]

welcome,good choice of colour mate. custom code is map cant fault it

 

[jack-cuprar]

i think im going to go to custom codes looks really good and are quite local too me which is a result,
only problem is i had the engine management light come on yesterday! got a friend too diagnose it and it come up with code p0172 fuel trim, bank1 system too rich, does any1 know how to fix this problem, thanks for the welcomes boys!!

 

[jack-cuprar]

cupramvr, what coulor are your wheels?

 

[CupraMVR]

They are matt black with clear lacquer on the top i did like them till a saw Nev's in satin black.

 

[jack-cuprar]

are there any pictures of nev's? want too get mine sprayed soon

 

[TimJK]

with the fuel trim problem, more than likely maf or lambda probe.

 

[jack-cuprar]

is this expensive or difficult to fix?

 

[jack-cuprar]

what is maf aswell?
cheers

 

[CupraMVR]

You will hav an air leak some where start the car up and listen with bonnet open and move the breather pipes about till you hear the hissing move about then replace that pipe.