-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
o2m shim?
- Thread starter tully78
- Start date
Was just a bit of residual oil, shim inserted, shaft no longer has movement, c clip was a little tight, snug fit. New cap on, and test drive done... very very happy with results ! 
Last edited:
Yeah I would but I don't think I'd be able to do it myself. Although this seems like an easy thing to do I dont feel like its something I would know what im doing so would prefer to take it to local garage. Just would rather know wether it would do anything before i pay the labour. unless of course somone in the hertfordshire/ essex area wants to give a cupra r friend in need a hand and earn a few notes.
I was lucky and didn't have the under tray fitted so saved a bit of time. I've not done anything like this before, I bought circlip pliers from halfords (£9.99), and had a screwdriver and malet to remove cap, and malet to put new one on. Took my time and took an hour in total
Just taken car out again on motorway, wow is am understatement ! Car drives like new, in fact I don't think its ever been this good !?.. every niggle I had with driving the car has vanished , no more gear stick move on accelerate, decelerate, no more whining, no clutch dipping, clutch peddle judder at idle etc.. just a lovely tight gearbox
, no more gear stick move on accelerate, decelerate, no more whining, no clutch dipping, clutch peddle judder at idle etc.. just a lovely tight gearbox 
Just taken car out again on motorway, wow is am understatement ! Car drives like new, in fact I don't think its ever been this good !?.. every niggle I had with driving the car has vanished
hahah sound a happy guy!
Mine drives me insane especially when I have to explain myself to someone new in the car that doesn't know what it is as sounds awful!!
Will buy the parts asap, even if its not right for my gearbox not sure if it's for my year, but only a tenner
Definitely worth it, I may have bashed on about it , but in my case it really has made that much of a difference !, I even thought about buying a new car it was that bad, I just hated driving it !.. but think I'll be keep it going now . It's on 95k, so just run in for a diesel engine !
, but in my case it really has made that much of a difference !, I even thought about buying a new car it was that bad, I just hated driving it !.. but think I'll be keep it going now . It's on 95k, so just run in for a diesel engine !
Stumbled across this yesterday, ordered the parts today from my vw dealer, my 04 plate Cupra R whines under engine braking from 3rd to 1st, hoping this will cure my problem as it's so irritating, especially when I have my music down to appreciate the cars roar, I you tubed the video and the guy literally pop the black cap off, takes out the circlip pops the shim in, puts the circlip back ok, new black cap back on, is it really that easy or am I missing some steps lol? Thank god for this post!!
It really is that simple !, removing the under tray if fitted may take a while (mine isn't fitted by choice )
)
Yeah I have got all of the bits that are in the way lol, how much oil am I expecting to see out of curiosity? I'm useless at gearboxes but this seems too good to be true and I'm trying to gather all of he information I should know about as im considering taking the tools in the boot and doing it in the vw forecourt as it pisses me off that much
Small amount of geabox oil, the oil level is below the bearing so nothing to worry about . Be patient when removing cap, and try not to damage the metal too much.
. Be patient when removing cap, and try not to damage the metal too much.
Fiddly bit is putting c clip back on !, I bought a pair of outer circlip pliers from halfords for 9.99, worked a treat !
Brilliant, thank you so much! I'll go purchase some tomorrow and I'm changing that bitch on the forecourt and having silence in the car for at least a minimum of a week, cheers guys
Similar threads
