Hello!
Seat Leon mk3 5F -14
CJSA engine (1.8 tsi) with DSG
Mileage: 89402km-55551mi
First problem, car keeps throwing this fault code. Local vag garage says it can be wire problem. When you clear fault code U can drive many days without warning light, suddenly it appears again.... Any ideas where to start? Coolant level is normal
1 Fault Found:
15462 - Control Circuit for Coolant Bypass Valve
P2681 00 [036] - Open Cricuit
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 19
Mileage: 89317 km
Date: 2017.05.19
Time: 11:24:34
Engine speed: 2252.75 /min
Normed load value: 11.0 %
Vehicle speed: 103 km/h
Coolant temperature: 99 °C
Intake air temperature: 12 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 13.281 V
Unlearning counter according OBD: 40
Engine: operating status: PL
Engine temp. management actuator: raw value: 1226
Engine temperature management actuator: stop open: 139
Engine temperature management actuator: after-run stop: 3959
RVC_SP: 72.25 °
RVC_AV: 72.72 °
RVCPWM: 0.000 %
Readiness: 0000 0000
Seat Leon mk3 5F -14
CJSA engine (1.8 tsi) with DSG
Mileage: 89402km-55551mi
First problem, car keeps throwing this fault code. Local vag garage says it can be wire problem. When you clear fault code U can drive many days without warning light, suddenly it appears again.... Any ideas where to start? Coolant level is normal
1 Fault Found:
15462 - Control Circuit for Coolant Bypass Valve
P2681 00 [036] - Open Cricuit
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 19
Mileage: 89317 km
Date: 2017.05.19
Time: 11:24:34
Engine speed: 2252.75 /min
Normed load value: 11.0 %
Vehicle speed: 103 km/h
Coolant temperature: 99 °C
Intake air temperature: 12 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 13.281 V
Unlearning counter according OBD: 40
Engine: operating status: PL
Engine temp. management actuator: raw value: 1226
Engine temperature management actuator: stop open: 139
Engine temperature management actuator: after-run stop: 3959
RVC_SP: 72.25 °
RVC_AV: 72.72 °
RVCPWM: 0.000 %
Readiness: 0000 0000