radio logos update

[KoNG]

Nothing has updated on mine when adding the file to the FAT32-formatted drive. The update wasn't recognised at all.

 

[Tell]

Nothing has updated on mine when adding the file to the FAT32-formatted drive. The update wasn't recognised at all.

Right. Well they still have not sorted that out then for Seat / Cupra then. It will use the descriptor of the unit plus the presence of the SE in that manifest file. It's a lot like the old VW POI input process where the unit needed to be recognised.

There are still missing UK radio logos in it from the Troc report and Briskoda, so it might not have helped. A design floor in not allowing users to update the radio images with their own png / jpegs as mib2. In the original documentation but never implemented.

I reckon basically if the radio logo image is in the phonostar radio internet bouquet as they call them it will be in the car's system file, but if not it won't be. They wont have done anything special to manufacture that file. They just leave off the Seat / Cupra unit descriptor which is a separate issue. It was in once.

Probably the connect services passage of the logos doesnt use the same import protocol so get's written directly into memory. That's how Seat / Cupra connect customers get their radio logo updates though that route which cant use the same method, obviously but still missing some radio logos. Siesta time in HQ.

As we have been told by @East Yorkshire Retrofits an online firmware update via connect services may then get a radio logo update but if you arent getting those firmware updates for reasons that it cant be updated.... fill in the dots, then your radio logos don't get updated, but if updated they are only as good as Phonostar's database who are the Vag provider of the logos.

 

[Tell]

Well MartiniB has updated the links to the latest

links in head post have been updated

MQB2_Europe_v1.10.66

MQB3_JND_Europe_v1.31.66

MQB3_LGe_Europe_v1.31.66

ICAS3_LGe_Europe_v1.31.66

See header post

Radio stations Logos database updates

Database is maintained by Phonostar.deand Škoda doesn't hide that but one of their answer sounded similar to. . . "Škoda's users don't have to contact to Phonostar" . . .life hack, if you have any questions to stations @ phonostar.de, write them as VW user updates can be downloaded fromhttps://ww...

www.briskoda.net

ICAS3 are the EVs ones. MQB2 the Mib2. Just leaves the 2nd and 3rd.as the remaining ICE Mib3/4.

As before not sure whether these work on Seat / Cupra... some did in the past. Don't have the unit.

If in contract for connected services you don't need the links. I seem to recall that if you get a firmware update which you get even if not in contract you can get a radio logo update to follow attributed to @East Yorkshire Retrofits. Suppose this saves the wait if there is no firmware update due.

Feel free to play and report back. Bauer logos are now in apparently... other than that you have to nag Cupra to sort out the logos for post mib2 where you are at the mercy of the infotainment provider.