Where can i get different bolts for my seat ibiza cupra wheels, i have standard wheels on my seat ibiza MK3 with hub caps at the moment but i wanted to know where i can get some new bolts i dont think the standard ones will be good enough in the long time. Any feedback is welcome thanks ...
the standard wheel bolts are fine mate, otherwise they wouldnt put them on the car. but if your watning new wheel bolts make sure your getting locking wheel nuts so no gypos can twoc them!!
You cant use standard bolts for steel rims on alloys, as they shread the alloy when they are done up.
You can get them from SEAT obviously but not that cheap. I had to get a FORD set once and it came to
£30 or something. Scrappie would be your best bet mate.
Emlyn
You can get them from SEAT obviously but not that cheap. I had to get a FORD set once and it came to
£30 or something. Scrappie would be your best bet mate.
Emlyn
I assume that there not all the same ?
And how much roughly will locking wheel nuts cost please
Thanks
And how much roughly will locking wheel nuts cost please
Thanks
Razor go see Stevie at Wheels R Us in belfast and tell him Dave with the Leon sent you and he'll sort you out 
I just paid £30 for a set to go on my new "secret" wheels that ive just got which shall hopefully be on the car for next weekend so you will see them if you go to Bangor I paid £80 for locknuts,wheel bolts and spigot rings.
Hes at Gaffikin Street http://www.wheelsrus.co.uk/Pg_Map.htm
I paid £80 for locknuts,wheel bolts and spigot rings.Hes at Gaffikin Street http://www.wheelsrus.co.uk/Pg_Map.htm
You will probs spot me first to be honest lol especially when I roll in in my car next sunday with the new wheels, coilovers and spraying done fingers crossed!
fingers crossed!
HaHaaa
No worrys bud
Gotta say your front end looks mean as foook.
Have you spotted the " killers " about Bangor before ?
No worrys bud
Gotta say your front end looks mean as foook.
Have you spotted the " killers " about Bangor before ?
Seat Dealer told me there is no difference between standard wheel nuts and cupra wheel nuts but he advised me to get some Locking wheel nuts at the cost of £20 from Seat. Just depends if your nut tips will be showing then you might want chrome plated ones had to check it all out
Locking wheel nuts are a joke.
If someone is going to stroke your wheels a £10 tool from Halfords can come in very helpful
If someone is going to stroke your wheels a £10 tool from Halfords can come in very helpful
Similar threads
