got forge boost hoses coming soon too! 
Here's my bay - done it this weekend. Simple enough to do! Done the 2 inthe left 8mm then follow those along and there are another 2 (under the strut brace) which I did 8mm. Then the one from the throttle body to the right of the manifold 8mm and the last one on the lower left was 10mm
post some pics on here once you have done it
Yea I couldn't find a neuspeed on selling by itself without the induction kit. And I couldn't justify spending £100 on a JabbaSport one.
Have fun fitting them! Really easy and buy some jubilee clips. It takes no time at all. Pliers, scissors and a crosshead - take the hoses off then measure up against the hoses you bought give about 2cm or so then cut with the scissors - always good to leave a bit of slack then once it's on one side and all clipped up then trim it down perfectly. Easier to do it that way then under cut an waste a whole length of pipe!
Good luck
) and im gonna get some stainless clips for the larger ones.
yeah the jabba sport ones are pricy but having seen one in the flesh they really are a quallity bit of kit.
bought some bright red cable ties for the smaller diam pipes (which arrived this morning
looks easy enough to do, one of the few things i should be able to manage.
would love to start a rr thread but i'm a bit a technophobe and cant put up pics!
Yeah I know they are a good bit of kit! But I like to be slightly different
I'm going to start a RR coz iv got loads of good pics and a good progress so far! You need to do what I've done - go to www.photobucket.com - sign up (free) then upload the pics onto your comp, upload them to photobucket - select a pic then it says "share" and at the bottom you need to copy and paste code into the forum post :)
Simples![/QUOTE]
ok cool, i'll try it now with a coulpe of random pics i have.
