what have you done to your car today ?

Found the annoying rubbing noise to be a loose undertray , the better half says it did seem a bit noisier!!!!!
Secured it back up and no rubs or plastic grinds . Also cleaned out catch can, no too much in there just about 5mm of gunk.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: bigT's lcr and BadBoy03
"Also cleaned out catch can, no too much in there just about 5mm of gunk."


Sent from my iPhone using Tapatalk[/QUOTE]

I find you need to close the drain valve first , don't think my ABS unit appreciated the oil/water cooling :-(
 
  • Like
Reactions: bigT's lcr and BadBoy03
Zardoz said:
Hoping to break the 600miles barrier with this tank. :D
Click to expand...
damn diesel power. i was happy to see my board computer still going up over 600km after driving 115 km. all time record for me lol. although i ruined it on the way back. :clap:
 
Last edited:
got another package

20190906-163145.jpg
 
  • Like
Reactions: bigT's lcr and Leon20vt4
Nizza said:
The battery stopped working and can't afford a new one because race car.

Sent from my VOG-L29 using Tapatalk
Click to expand...
Hopefully get a new one in my Christmas cracker but what do you update a rolex with

Sent from my VOG-L29 using Tapatalk
 
Well just ordered neuspeed anti roll bars from VRS in Northampton. 25mm front and 28mm rear bars. With adjustable drop links and bushes. £600. Didn't think it was too bad.
Was looking in to valves. Was going to go for supertech but now after a bit of searching I have seen a farebit of bad news about them. About the steam cracking and in worse case situations the valve head conning off and then rattling around the bore. So now looking into ferrea valves but they only Sean to be in America and can't find any one who imports them
 
  • Like
Reactions: bigT's lcr, Andrewwright and Nizza
Nizza said:
Hopefully get a new one in my Christmas cracker but what do you update a rolex with

Sent from my VOG-L29 using Tapatalk
Click to expand...

@Nizza, maybe in your Christmas cracker you might get a Patek Philippe Nautilus, defo upgrade from a Rolex lol.


Sent from my iPad using Tapatalk
 
  • Like
Reactions: Maypack
Mamic172 said:
Well just ordered neuspeed anti roll bars from VRS in Northampton. 25mm front and 28mm rear bars. With adjustable drop links and bushes. £600. Didn't think it was too bad.
Was looking in to valves. Was going to go for supertech but now after a bit of searching I have seen a farebit of bad news about them. About the steam cracking and in worse case situations the valve head conning off and then rattling around the bore. So now looking into ferrea valves but they only Sean to be in America and can't find any one who imports them
Click to expand...

That’s the Supertech iconel valves. I believe the stainless steel ones don’t have that problem. I’d rather bend a valve than snap it off


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: bigT's lcr and Manic172
You must log in or register to reply here.

Similar threads

Car cranks but no start
Replies
30
Views
4K
mty12345
Weird issue when turning on car ignition
Replies
3
Views
1K
sol_j
Smoke from Alternator area
Replies
2
Views
880
Nam-uk
Nam-uk
Water Lying on Door
Replies
6
Views
1K
mty12345
Brake fluid leak
Replies
20
Views
939
mmisch
SEATCUPRA.NET Forum merchandise
Top Bottom
Back