Your track setup's / handling brakes etc...

[chrisbond69]

15mm spacers,
kw silverlines,
braided hoses,
brembos,
ferodo ds2500 pads
motul fb600 brake fluid
front 25mm and rear 28mm arbs
front and rear strut braces,
vibra technics engine, gearbox and rear beam mounts
powerflex bushes,
groved rear discs,
new stock top mounts,
new lower arms,

b&m shifter,
ecs clutch kit,
tt shifter,

 

[ian_cupra]

will this fit on the lower then??
http://cgi.ebay.co.uk/OMP-FRONT-LOW...tcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[jonesya3]

15mm spacers,
kw silverlines,
braided hoses,
brembos,
ferodo ds2500 pads
motul fb600 brake fluid
front 25mm and rear 28mm arbs
front and rear strut braces,
vibra technics engine, gearbox and rear beam mounts
powerflex bushes,
groved rear discs,
new stock top mounts,
new lower arms,

b&m shifter,
ecs clutch kit,
tt shifter,

You must have spent a fair fortune on that lot mate nice going

do the arbs make the ride alot stiffer/harder ?

 

[chrisbond69]

none of its fitted yet, its all to be fitted, in june when im back from iraq, and all is in place powdercoated and polished etc, etc, spent a bit but over nearly 2 years of collection between me flying here there and everywhere, hoping i can get 3 weeks off after iraq and do it all then,

 

[chrisbond69]

ian_cupra will this fit on the lower then??
http://cgi.ebay.co.uk/OMP-FRONT-LOWE...QQcmdZViewItem

ive mailed the seller with regards this item and the mk2 4 point item, when he gets back to me ill post up here,

 

[jonesya3]

none of its fitted yet, its all to be fitted, in june when im back from iraq, and all is in place powdercoated and polished etc, etc, spent a bit but over nearly 2 years of collection between me flying here there and everywhere, hoping i can get 3 weeks off after iraq and do it all then,

are you in the army then chris or just working over there

car will be mint whens its done bet you cant wait

 

[chrisbond69]

raf mate my fifth trip to iraq, should be lovelly when done with all the other bits and pieces, trying to get it all done at once and hopefully get a feature, your spec list is damn good

 

[jonesya3]

raf mate my fifth trip to iraq, should be lovelly when done with all the other bits and pieces, trying to get it all done at once and hopefully get a feature, your spec list is damn good

yer is not bad just missing gt2x

been watching that new ross kemp program shows how hard your job is mate take care overthere

 

[ian_cupra]

in raf?? you working from brize??

 

[chrisbond69]

nah from benson, why you say brize,

 

[ian_cupra]

always out there, thought maybe on c17's or summin.

i just been posted to coningsby seen as 25 sqn shutting up here at leeming

 

[chrisbond69]

your damn lucky your not on merlins then, loads of people have been posted onto the squadron, from everywhere, very unhappy people, many 2nd line people being posted with us front line,

 

[ian_cupra]

yeah think a few guys from here have been posted onto sqn's too, not happy bunny's

 

[chrisbond69]

bump can anyone specify the right part number for the lower arm, alex at tts was on about ma/1612 fitting can anyone confirm this one

 

[ian_cupra]

i just went on ebay, bought the golf mk2 one, red straight bar, 35quid ish

 

[h17och]

(delayed reply from hooch) i just pressed a round bar into the side of it. it created a nice tidy curve in one side. and yes a big difference!

my spec

Porsche boxter calipers with 315mm 2 piece discs with braided hoses and 5mm spacer
25mm neuspeed arb front, 28mm h&r rear
10mm rear spacers
bilstein pss9 coilovers
front upper and lower strut braces
rear upper strut brace and harness bar (copied from my dear girlfriend alex)
peli lsd
uprated bushes all over front (yet to do rear)
carbon fibre porsche seats
all sound deadening removed

same **** as everone else really

HoocH

 

[chrisbond69]

you got pics of your front lower one please hooch, and andy so i can see both on the car,

 

[PhilW]

mk2 8v lower strut from rallydesign bolts straight on without any mods.

 

[chrisbond69]

found that one ma/1559 on rallydesign is it?, and the ma/1558 on strutbracer why the difference, do you have the item fitted phil,

 

[PhilW]

http://www.rallydesign.co.uk/product_info.php?products_id=524

One of the boys fitted one last week, straight on, perfect fit.