-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
Even cheaper from mcgillmotorsports on ebay.
That postage is a bit steep Husbandofstinky
Aye that's why I thought I should breakdown the costs.
Still going to be a damn site cheaper than Neuspeed and if Dave's had no problems with them that's good enough for me.
I am far from complaining about £30. If I ordered from Awesome I think their standard delivery charge was £10 plus VAT too.
Personally I'm chuffed to bits. Cost was not the issue, time was.
i thought the postage did seem a little rediculous!
but like dave says you dont want the same thing happening again cos
of poor quality!
but like dave says you dont want the same thing happening again cos
of poor quality!
Suppose so, I do recall the name from another members post the first time this came up.
Worth a punt on either but if Dave has had no problems. Good enough for most
If you've bought online from redline, i'd suggest phoning to make sure they have stock/your order.....
Well guys how did this turn out?
I'll be redressing these joints soon and have looked at a local place but these joints are more vehicular than lifting equipment.
I'll be redressing these joints soon and have looked at a local place but these joints are more vehicular than lifting equipment.
TBH Redline took forever (about 8 weeks to deliver). Apparently due to a show and was sold out of said items. Replenishment of stock was due from the States.
I had also ordered Neuspeed items and awaited for this too to arrive from the States via Awesome. The ARB kit from Neuspeed cost a total of £82.23 however this included bushes a couple of brackets and further nuts and bolts. Relative to the £30.36 for the joints from Redline I did not think its was too extortionate. Anyway I now have a pair of spare Redline joints if I need them.
I am hoping that these joints will last as it was only the thread went on one of the male/female joints. In all honesty I think the problem was with the fitting rather than the product. A lock nut was not used nor was there adequate grease in the thread for protection. In essence the winter salt solution sat in between the thread and rotted it out in one winter.
Hopefully with the nut there and plenty of grease they should last this time.
Only time will tell of course.
I had also ordered Neuspeed items and awaited for this too to arrive from the States via Awesome. The ARB kit from Neuspeed cost a total of £82.23 however this included bushes a couple of brackets and further nuts and bolts. Relative to the £30.36 for the joints from Redline I did not think its was too extortionate. Anyway I now have a pair of spare Redline joints if I need them.
I am hoping that these joints will last as it was only the thread went on one of the male/female joints. In all honesty I think the problem was with the fitting rather than the product. A lock nut was not used nor was there adequate grease in the thread for protection. In essence the winter salt solution sat in between the thread and rotted it out in one winter.
Hopefully with the nut there and plenty of grease they should last this time.
Only time will tell of course.
Thanks for the reply stinky, The supplied Neuspeed one's I have are cast shite.
i'm wanting a solid and better made one, like the ones from Redline.
Think I'll give them a try
i'm wanting a solid and better made one, like the ones from Redline.
Think I'll give them a try
BTW, I am not Stinky just the husband of.
Looking at both types, I don't think there was a lot in it tbh.
Looking at both types, I don't think there was a lot in it tbh.
Similar threads
