-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
loads haha,
tuesdays update,
still really short staffed so done the best i can today, tbh the rear bumper is really holding me upnow
so today i have:
fitted the rear doors up
the roof and screen trims,
tinted the rear lights and fitted them,
put 5mm spacers on the front, need to order different shaped bolts for the rears(10mm spacer)
fitted the rear spoiler and ran boot wires,
fitted my polished charge pipe, courtesy of dk, then cleaned under the bonnet
then gave the glass and interior a quick de-dust.
oh, fitted the brembo decals too
pics:
jake
tuesdays update,
still really short staffed so done the best i can today, tbh the rear bumper is really holding me upnow
so today i have:
fitted the rear doors up
the roof and screen trims,
tinted the rear lights and fitted them,
put 5mm spacers on the front, need to order different shaped bolts for the rears(10mm spacer)
fitted the rear spoiler and ran boot wires,
fitted my polished charge pipe, courtesy of dk, then cleaned under the bonnet
then gave the glass and interior a quick de-dust.
oh, fitted the brembo decals too
pics:
jake
brad1
Guest
Looking the nuts now mate, i know its a cupra R, but how comes its got a twin tail pipe exhaust??
i have smoothed out the exhaust exit on the rear bumper so have cut the tip off the cupra r back box, just need to make a panel to flute the gases down wards now
strugers1
Guest
btw emdee pretty sure i got 8 good turns on the front wheels with 5mm spacers, just need to get the rear longer bolts changed as there dome fit ment not beveled.
Stunning mate. Just stunning. Looks like a top quality job mate.![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
i always make my own,
first i scotch them with grey scotch, prekleen, then apply a coat of plastic adhesion promotor. then i thin down black solvent paint, so its super thin, give it the desired coats then i just clear coat the lights completely.
jake
first i scotch them with grey scotch, prekleen, then apply a coat of plastic adhesion promotor. then i thin down black solvent paint, so its super thin, give it the desired coats then i just clear coat the lights completely.
jake
That's why I asked... didn't expect you to go for the easy "off the shelf" option. Looks like a very subtle tint... I like!
yesterdays update,
had to shoot off to a wedding reception, so updating now.
not much done
fitted the rear 10mm spacers and new bolts, also prepped and painted the skirts and rear bumper (finally)
pic
today build the bloody thing back up!
jake
had to shoot off to a wedding reception, so updating now.
not much done
fitted the rear 10mm spacers and new bolts, also prepped and painted the skirts and rear bumper (finally)
pic
today build the bloody thing back up!
jake
Similar threads
