Oil catch tank fitted..just to make sure i fitted it properly..
1st i took the pcv t piece out, removed pcv valve from it, blanked it and put it back so t-piece is now just like a joiner...
Uploaded with
ImageShack.us
then i took out "the mushroom thingy" from TIP and blanked the hole in the TIP.
Uploaded with
ImageShack.us
then i reused ruber hose that used to be connected to mushroom thingy , and connected it to the catch can and then just used another hose from catch can down to wing..
Uploaded with
ImageShack.us
Uploaded with
ImageShack.us
i dont have any kind of filter on the end of the hose in the wing cuz air is blowing out from it...
if this is correctly connected there is no really point in the catch can right?
i could just use a piece of hose instead of it and let all the oil and condensation just leak under the car...