what have you done to your car today ?

bruceR

Active Member
Apr 11, 2005
2,575
663
Monifieth, Dundee
Rattle (tinny sound) coming from front right-ish engine area while driving, happens mostly at 1500rpm in most gears.
Found the right undertray cover support loose with snapped spring clips, replaced these and test drive still rattling.
The 2 rear bolts were missing from either side supports so installed riv-nuts and secured the side supports and undertray.
Raging as it’s still rattling - hope it’s not my clutch starting to go


Sent from my iPhone using Tapatalk
 

Nathan penney

Active member
Jul 8, 2017
772
945
Liverpool
The worst thing happened...


I lost a skirt cover
Oh no! Mine are screwed on. I keep a small stubby screw driver in the spare wheel kit just incase.
Which one? I might have a spare.
I’ve a couple of skirts at the side of my shed but I can’t remember which are on and which aren’t. They’re silver though and probably scratched.
When I was having some paint done on my car last time, I got them to paint up a full set in yellow just incase.
They’re wrapped in bubble wrap in a box in the loft. ;)
 
  • Like
Reactions: jlv81 and BadBoy03

BadBoy03

A Mk1 Is For Life, Not Just For Fun
Sep 6, 2016
757
554
Somerset
Rattle (tinny sound) coming from front right-ish engine area while driving, happens mostly at 1500rpm in most gears.
Found the right undertray cover support loose with snapped spring clips, replaced these and test drive still rattling.
The 2 rear bolts were missing from either side supports so installed riv-nuts and secured the side supports and undertray.
Raging as it’s still rattling - hope it’s not my clutch starting to go


Sent from my iPhone using Tapatalk
That's frustrating, especially after fixing some possible offenders. So hard to guage too when you're driving & stationary 🤔
Hopefully not the clutch 🤞
 

Manic172

https://m.facebook.com/ManicMotorsport1
Dec 4, 2018
1,448
1,585
Hemel hempstead
www.seatcupra.net
Bit more progress
img_1_1746446303094.jpg
 

Connor H

Active Member
Dec 19, 2019
1,040
512
Essex
Oh no! Mine are screwed on. I keep a small stubby screw driver in the spare wheel kit just incase.
Which one? I might have a spare.
I’ve a couple of skirts at the side of my shed but I can’t remember which are on and which aren’t. They’re silver though and probably scratched.
When I was having some paint done on my car last time, I got them to paint up a full set in yellow just incase.
They’re wrapped in bubble wrap in a box in the loft. ;)
its the front drivers side! the little rubber string broke and i knew it was a matter of time lol.

Tbh the whole right skirt needs replacing
 

ExiledWeegie

Active Member
Jun 15, 2024
111
68
Fife, Scotland
another mod today, wanted a flat bottomed wheel on my old audi but it had multimedia controls and i wasnt paying the money for one so added a cheap and cheerful flat bottom wheel to the cupra, wheel, boss kit and wire for disabling airbag cost £89, now to find a seat or cupra badge that will fit the middle.
 

Attachments

  • 20250509_163414.jpg
    20250509_163414.jpg
    390.4 KB · Views: 27
  • Like
Reactions: bruceR

Battoussai

Active Member
Mar 22, 2016
527
175
Portugal
another mod today, wanted a flat bottomed wheel on my old audi but it had multimedia controls and i wasnt paying the money for one so added a cheap and cheerful flat bottom wheel to the cupra, wheel, boss kit and wire for disabling airbag cost £89, now to find a seat or cupra badge that will fit the middle.
It is a daily driver? I can't see myself taking off the driver airbag - it could save my life - but mine is a daily driver.
 

Alexis27

Active Member
Dec 20, 2009
2,192
517
Manchester
Lol. Yeah it was good news. I didn't a couple of things that would have been a major fault on the lesson before. So it just made my anxiety even worse, but at least I passed. With only 3 minors
What's the deal on the MOT history? Website says was done in March and it only has 20k miles? (Sorry for being nosey!)
 
SWANSWAY CUPRA Dealership