result

14.08 second 1/4 mile @ 98.62mph. I call that a result. Car is still running factory map. (video on Youtube) Autocar measured 15.1 sec for the 237bhp Leon Cupra. Next stop, Castle Combe 24th April. Nice to see a few members at GTi Festival-Santa Pod.

Apologies for the delay, it was harder than I thought to find a scanner!! Anyway, for all the 20 valvers out there, here is the result of my rolling road; It is totally mod free, not done anything except replace a few coil packs. It's long past 120,000 miles, and according to the all-knowing...

Hi guys :) Got my car on the RR today with the local car club, quite pleased with the result Mods are - AmD Stage 1 Remap Open Induction kit 3" Downpipe and decat / standard centre section / Supersprint backbox N75J Valve Uni FMIC Got 200bhp and very pleased with that...

Well i took the old bus on the rollers the other week....last time it was on it pulled 210bhp. Not bad for a remap - K+N filter - decat exhaust

I see quite a few posts on hear about the V5's fuel consumption so I thought I would post my results. I have just been away for a long weekend and covered 190 miles in 4 days on mainly A roads but also quite a few short journeys and down little single track lanes in Dorset. When I got home I...

Hi all, I am in need of all 4 tyres replacing, time has come and i'd rather start fresh all round. Now after reading various posts over the last year or so i am swayed towards the following: - GSD3's - Goodyear eagle f1 (expensive) - Falken 452's (cheap) Now, here's the dilemma - I...

i had a headunit fitted and needed the space where the storage slot is for all the wiring and my soon to be fitted kce350bt bluetooth kit. i i bought a blanking plate from my seat dealer for £3.09p (surprised as it was the dealer) an its plane black as pictured below. i was wondering...

After spending nearly £500 on all doors and according to seat every possible way the water could be coming in and guess what. still leaking =[ last option I was told by seat is to have the windscreen refitted. has anyone had to do this? By the way its my drivers footwell that is always...

Well after having a few arguments with Seat ref my poor fuel economy I found out the problem yesterday went to visit Charlie at Surrey Rolling Road ( Nice guy ) and he advised me that the K+N Panel filter I fitted after getting my FR TFSI was the problem. The thing with these filters is they are...

well as some of you know i went to get my car on the rollers on saturday really happy with the results as graph shows its made 203.3bhp 217.9lbft so im pritty chuffed with it. the firdt run came to 201.8bhp but unsure of torque. sorry abot picture as the car was very dirty hehe. more power is...

For those of you who do not want to install HID ( wouldnt know why though) and just want to simply upgrade the existing H7 bulb, thought you would like to know that auto express carried out a test on over 30 such bulbs and Philips X-Treme Power H7 won by far, but at £32.99 a pair, reckon you...

I think I may have got a luxury pack fitted to my car without paying for it? I picked up my brand new FR last Sat, it's a completely standard one and arrived within two weeks of being orderd, anyway... am I write in thinking that a Standard FR does not come with electric folding mirrors...

Whacked the car on the rollers today at Engine Advantages in Essex. Mods include a map of some description, custom CAI, supersrpint cat back, custom front mount and a forge 007p Made 212.7 bhp @ 4894 rpm and 244.4 lb/ft of torque at 3466rpm Quite chuffed with it really. Only other...

Hi everyone, I currently have a Black Ibiza Cupra Tdi, with a Green Cotton air filter, Sachs uprated clutch a Revo remap, so pumping 200bhp maybe a bit more, had a run in with a Blue Renault Megane 230 R26 (nice looking car for a Megane with the light blue and yellow livery at the front and the...

I had my ibiza dyno'd on sunday was keeping fingers crossed for around 220bhp and the car produced 209bhp@4693rpm and 244ft.lb on its 2nd run which i thought was quite odd as i'd actually expect it to produce more power on its first run? anyway the graph shows a dip in power soon after peak...

Anyone with experience with exhaust work combined with remap on Cupra TDI's?? What results in power increase??? Sound?? Think about putting a 2,5Inch pipe on my Ibiza Cupra TDI before remap!!!

This was the best run of the day which I had. Problems with holding boost and the car is running quite lean. This was the only run I had where the boost held.. Now I can see where things need to be adjusted, this is the start to my future of modifying the beast :D

Yep you knew it, its gone bang lol!! Now to get an uprated one, anyone got any advice on this, i am well aware of whats out there, just want peoples views that have had them fitted.

Went on a rolling road shootout day today with the itr-dc2 forum. Everyone made bang on thier expected results, with 5 or 6 standard cars (Accord type Rs and Integra Type Rs) all making bang on standard power (ATR is 212 bhp standard and the UKDM ITR is 185 bhp) So, theres the background...

My car went into K&N this week to have an apollo kit developed for it. Picked it up yesterday, i ve noticed a loss in power. They told me they couldnt fit a cold air feed because of the space restrictions thats in the engine bay anyone any ideas?? Or just put it back to standard, and get a...