Custom intercooler piping

[Ultra_Joel88]

allard power pipe?

 

[Ultra_Joel88]

whats the part number for that metal pd160 pipe?

 

[orange]

Ultra_Joel88

6LL 145 770A

ph2858,

I'm just waiting for the shipping cost. Get back to you in a few moments.

Cheers

 

[Ultra_Joel88]

Ultra_Joel88

6LL 145 770A

ph2858,

I'm just waiting for the shipping cost. Get back to you in a few moments.

Cheers

Cheers mate, typed that part number in vag-cat and nowt came up, must not be listed on there

 

[Ultra_Joel88]

anyone know if that chrome PD160 boost pipe will fit a pd130?

 

[kriso]

anyone know if that chrome PD160 boost pipe will fit a pd130?

You would have to replace at least the two pipes it attatches to aswell as they use different types of clips. I would spend the £150 or so on something that owuld make a real difference

 

[frenchy]

They look different on the pics on ETKA so I wouldn't have thought so. But im sure someone else will correct me if I'm wrong.

 

[orange]

They have different outside diameter, so no point. It only make sense if you have the Cupra fmic. I mean, a bigger and same diameter tubing from the ic outlet straight to the EGR. FR and Sport have smaller diameter tubing.

Cheers

 

[CORBY]

We don't want it to try and make our cars better, we just want some piping that won't pop off! Its a must not a necessity!

 

[mexicorich]

Someone on here had photos of a stainless pipe they got a local exhaust specialist to bend up for them as a copy of the plastic pipe

 

[keano20v]

mines metal too and mines a 130

 

[Ibiza 130 tdi]

Maybe it's a case of the usual SEAT mix and match?

 

[Guinness]

is this metal pipe the same as the one on the petrol?

 

[Ibiza 130 tdi]

This is what I want to replace:

I have a metal one of these in my garage. Didnt get round to fitting it cos couldnt be bothered with the hassle and the modding. So just went from the headlight down with my pipework.

 

[kriso]

is this metal pipe the same as the one on the petrol?

No, the petrol intake manifold is at the front of the engine so there is a short felexible pipe that joins the throttle body just above where the alternator is.

 

[Guinness]

does anyone have the part number for the PD160 charge pipe? and possibly and ETKA diagram?

 

[kriso]

Pipe 10 is 6LL 145 770 B if that's the one you're after.

 

[d0nr0b]

Has anyone tried to replace standard FR PD130 plastic pipe with this metal PD160 charge pipe?? Is it a direct replacement??

 

[john@forge]

Sorry we do not offer a replacement for this pipe.

 

[ibizadoyle]

wats the difference in the connections then? does it fir an fr 130?

thanks