-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
Had the drivers side soundproofing taken out and thought about having a goldfish feature lol Just got to wait for a new windscreen (from a mate) and seal up all the skuttle holes/entry where the water comes in.
Last edited:
Installed fan jets for the windscreen, all they need is a light sanding/filing to make them narrower and the clip straight in.
They are of a Peugeot and the ebay ad was FRONT WINDSCREEN MIST TYPE SPRAYER WASHER JETS X 2 FOR PEUGEOT 206 6438E6 6438E6 is the part number for them, 10 minute job.
Click picture for video
They are of a Peugeot and the ebay ad was FRONT WINDSCREEN MIST TYPE SPRAYER WASHER JETS X 2 FOR PEUGEOT 206 6438E6 6438E6 is the part number for them, 10 minute job.
Click picture for video
Trancer
Guest
Lee. First I'd like to congratulate you for the beautiful car. I know I'm not the first for that and will not be the last but ... You gave me many ideas for my standard Leon. Cupra R splitter is the best one! Thank you for that.
So, on the question. Can you please explain little more, how to remove the old water jets from the plastic cover under the wind shield. Do I have to remove the whole plastic part or it can be removed from the top? If its ok for you to give us little detail explanation or maybe a picture would be great.
So, on the question. Can you please explain little more, how to remove the old water jets from the plastic cover under the wind shield. Do I have to remove the whole plastic part or it can be removed from the top? If its ok for you to give us little detail explanation or maybe a picture would be great.
Ta for the comments.
Operate and switch off the wipers so they are vertical on the windscreen.
Remove the wiper caps then the nuts.
Pour boiling water over the splines
Pull up the arms wiggle and they should come off.
Remove the pollen filter screws then the cover.
Remove the rubber along the scuttle panel.
Lift the scuttle up slightly and pull off the hose feed from the bottle (driver side jet it is near)
scuttle will then pull free.
Replacement is easy just work backwards, but turn the ignition on and the wipers off so they are in the park position..
Operate and switch off the wipers so they are vertical on the windscreen.
Remove the wiper caps then the nuts.
Pour boiling water over the splines
Pull up the arms wiggle and they should come off.
Remove the pollen filter screws then the cover.
Remove the rubber along the scuttle panel.
Lift the scuttle up slightly and pull off the hose feed from the bottle (driver side jet it is near)
scuttle will then pull free.
Replacement is easy just work backwards, but turn the ignition on and the wipers off so they are in the park position..
Last edited:
I like the 1.2's often thought about getting a set, they look much better in real life(no offence), its hard to photograph those wheel for some reason, don't now why.
Looking good , are the vredestein i spy
Looking good , are the vredestein i spy
No my old favourite hankook evo v12 cars getting a good wash/polish early May i'll post fresh up then as it's filthy now
This car is mint, i love the tail lights! They already like that or you do them yourself? Same colour as mine and the black really suits it.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
Similar threads
