Post your MK2 Leon Power/Torque graph

[lasbazrre]

^^^^^^^^ Is that std mate?

Thanks

leon

 

[DanGB]

of course not

Standard is 182/197hp and 200 odd of torque. dunno how accurate it is though, Dyno figures are only pub talk anyway

 

[Chris_Cupra]

of course not

Standard is 182/197hp and 200 odd of torque. dunno how accurate it is though, Dyno figures are only pub talk anyway

But that's still impressive for a 185/200ps TFSI/FR with a remap ... What kind of remap you have and is there a turbo-back exhaust in the car ...???

 

[Chris_Cupra]

Hi every body!!

Sorry for my little level in english, i say you my power/torque graph after remap :

319 HP and 480 Nm

These are very good figures ! Which remap is in there, and is it only remap, or remap+full exhaust or remap+exhaust+induction kit, etc ...???

 

[DanGB]

But that's still impressive for a 185/200ps TFSI/FR with a remap ... What kind of remap you have and is there a turbo-back exhaust in the car ...???

remap and er.. everything else you can mod on this car

 

[cuprascott]

guys no scanner, but just had my 2.0 tdi fr mapped last week.
199.5 bhp
308 lb torque

Cool! What did it have standard?

 

[noufinho]

These are very good figures ! Which remap is in there, and is it only remap, or remap+full exhaust or remap+exhaust+induction kit, etc ...???

it's with a remap and full exhaust

 

[tommy-cupra]

These are very good figures ! Which remap is in there, and is it only remap, or remap+full exhaust or remap+exhaust+induction kit, etc ...???

480 nm?????????? stock cupra has a 300nm and remap cca 370-390nm

 

[TristanLeon20VT]

Result: 280hp and 415Nm (JD Engineering custom remap and Full Milltek non-resonated)

Vid's on dyno:

http://www.youtube.com/watch?v=XFeutKx6-V4

http://youtube.com/watch?v=GoIq3yhPhoo

 

[YIN]

Torque comes out high for ome reason on ptorque software problem
was actually about 310lbft

 

[noufinho]

480 nm?????????? stock cupra has a 300nm and remap cca 370-390nm

In France, the max that you have is 480 nm, the normally is 440-460 nm

 

[honeyman]

Here's mine finally got round to posting it

 

[ste-lfc]

link to mk2 cupra graph

this was done in april, only 800 miles on the clock

 

[yorkphil]

Here's mine following CC remap. Very impressed with the results, it drives like a different car. Stock was 167.6 BHP 237 Torque

 

[Rampage]

Thats pretty impressive.
Although the torque should be the same at the wheel and flywheel?

 

[CandyCupra]

Hi All,

Had my FR TDi Remapped at P-torque over the weekend, it's a really smooth power delivery and pulling from 40 is just like it's in third lol, also even though it's been wet over the weekend (and week so far) i swear because the power delivery has been smoothed out it wheelspins less which is good and theres less lag when under 2K revs. Anyway graphs to follow but the figures are: 204.4bhp @ 4190 rpm and 317 lbs/ft @ 2390 rpm.

Cheers,

Tom

 

[H8T WP]

just got my cupra done. It made 239.9bhp on the rollers. Graph is in glove box will be on tomoz

 

[DanGB]

just got my cupra done. It made 239.9bhp on the rollers. Graph is in glove box will be on tomoz

interesting, which rollers?

 

[H8T WP]

Dedline tuning in basildon !

not sure torque is correct looks low lol test done in 4th gear !

here is the graph :

 

[Chris_Cupra]

Dedline tuning in basildon !

not sure torque is correct looks low lol test done in 4th gear !

here is the graph :

These MUST be wheel HP figures, aren't they ... ??? The graph does not show rpms on X-axis ... The torque figure is admittedly low ... What kind of remap is in ...???