s3 strut brace?

[drance]

hi all

does anyone know where i can find upper and lower audi s3 strut braces ive got the part numbers but cant find anywhere to order dont really fancy going to the local stealer

thanks

dave

 

[bristolsparks]

audi is the cheapest and easiest mate, they wil take a day to come in stock, around £90-100 quid for both

 

[rideonracing]

do u know if the audi s3 strur brace wud b the same as the audi a3 brace? iv got a leon cupra r and lookin for a strut brace for that. cant seem to find one! ne help??

 

[bristolsparks]

the audi s3 will fit the cupra r mate, upper is around £60 and lower is around £30 from audi.

 

[Gunnie]

I hope you dont mind me asking but will a S3 upper strut brace fit a 03 plate 1.8T leon Cupra??

 

[bristolsparks]

Gunnie, it will fit mate, not a problem, i have an 03 cupra aswell, fits like a glove

 

[james walker]

the audi s3 will fit the cupra r mate, upper is around £60 and lower is around £30 from audi.

the cupra r has the lower brace as standard..

 

[Gunnie]

Gunnie, it will fit mate, not a problem, i have an 03 cupra aswell, fits like a glove

Nice one better get meself down to Audi tomorrow

 

[olliep]

could someone confirm the current part number for the LOWER brace. The one on Pabs' guide may have been superseeded as TPS claimed it was dodgy?? the fixings seem to have stayed the same though

 

[ScoobyJawa]

I used the code on that guide a few months ago and it was fine?!

 

[Nef]

would the lower brace fit my 2002 cupra.

 

[ScoobyJawa]

yes

 

[Andrewcupra TDI]

to confirm the S3 brace will fit all mk1 leons what ever engine size , and s3 lower one too

the R already has the lower brace as std

i used the codes on pabs guide about 6-8 months ago all fine ,

had to trim the lip on the upper brace as it was rubbing the gas strut (that holds the bonnet up )

job done
cheers

 

[James_R]

to confirm the S3 brace will fit all mk1 leons what ever engine size , and s3 lower one too

the R already has the lower brace as std

i used the codes on pabs guide about 6-8 months ago all fine ,

had to trim the lip on the upper brace as it was rubbing the gas strut (that holds the bonnet up )

job done
cheers

Well done for that Andy, you have prevented many more people reading this thread then asking previously asked questions.

 

[Nef]

just ordered an audi s3 lower strut brace, parts numbers all ok.

just wondering how hard is it to fit? also is it worth getting the upper one aswell?

and anyone know exactly how much the upper s3 brace is?

 

[james walker]

60 quid for upper brace

s3 easy to fit, theres only 2 holes it will fit in.. did you order the riv nuts with it?

http://www.seatcupra.net/index.php?option=com_content&task=view&id=509&Itemid=6

 

[drance]

upper strut brace (8L9 805 629 A) the lower strut brace (8N0 199 403 B) N 908 106 01 – riv nut x2, for lower strut brace · N 104 176 01 - bolt x2, for lower strut brace · N 904 773 01 - washer x2, for lower strut brace

all for £ 102.75

 

[Nef]

60 quid for upper brace

s3 easy to fit, theres only 2 holes it will fit in.. did you order the riv nuts with it?

http://www.seatcupra.net/index.php?option=com_content&task=view&id=509&Itemid=6

cool, yes mate, ordered the riv nuts and washers. came to a total of about £32

how much difference will the lower one make?

 

[james walker]

quite a bit tbh... good cheap mod.

 

[JamJay]

No-one has mentioned that you'll need to drill into the car to fit the upper brace.