What does this mean? Please help!

[smoothuk]

I have just been to the garage and they did a diagnostics test on it and there was 'No faults found' so i think it may be sorted now

I told you i clicked the right button...*rolls eyes*

 

[Essex_Cupra]

If you're looking for clips these are VERY good! Not cheap but well worth it I think and you will only need one.

I need to order a few of these asap ! Can someone please confirm the size to order please? I'm looking to replace the standard clips on the charge pipe. The ones that are under the heat proof cover.

Thanks

 

[jetsetjimbo]

Which hoses are you wanting them for?

 

[Essex_Cupra]

I'm sure its called the charge pipe its the one that has the heat proof coat on it and fits on to the turbo. It runs over the top of the engine and I need two of these high torque clamps to make sure its secure on the turbo, some people have them chromed/polished

 

[andycupra]

can you not go measure it ?

 

[Essex_Cupra]

I messured it and came out length 22cm so 220mm but on the pipe at the front of the car it has got 60mm written on it and its the same size!! Which is the part i don't understand.

 

[jetsetjimbo]

The existing clips will have the sizes in mm stamped on the outside somewhere.

From memory I think the on the on the end of the charge pipe I got the 64-86mm one. Then the size up from that for the turbo hose to charge pipe and all the top intercooler hoses.

 

[Essex_Cupra]

The existing clips will have the sizes in mm stamped on the outside somewhere.

From memory I think the on the on the end of the charge pipe I got the 64-86mm one. Then the size up from that for the turbo hose to charge pipe and all the top intercooler hoses.

i've just bought 3 clips from forge size 50-70mm hope this will do it! I want it tight anyway!

 

[flashbsd]

51mm the charge pipe, the IC hoses are 63mm.

 

[Essex_Cupra]

51mm the charge pipe, the IC hoses are 63mm.

Looks like i've got the correct size then just!