what have you done to your car today ?

[RaviR50]

Just fitted the fabia wiper, took the best part of half a minute!! Sounds a lot better now though and looks great!! Might get a proper functional test of them tomorrow

 

[RaviR50]

Resealed the rear passenger door, wasnt a 30 min job like people say but the guide works great!! Just have to wait and see if it worked. http://www.seatcupra.net/forums/showthread.php?p=3255713#post3255713

 

[nd-photo.nl]

Replaced my old N75 F revision with a new N75 E revision and cleaned the gaslid. Cars drives "sleeker" and turbo buildup is better (more explosive), like it should be. Im happy

 

[useyourname]

Finally replaced all 4 door seals. Took just under 4 hours... An easier way of getting the first handle off is to use a mallet with the plastic pry tool on top to get a gap, then use a flat head screwdriver (cover it first) and use that to wedge the top and bottom and it comes off much easier!

All 4 seals were completely screwed, mainly around the common speaker area but rear passenger door was shafted even more. Took a long time to clean them up properly so that's why I think it took 4 hours....

Also Gaffa taped my split oil breather pipe.

 

[useyourname]

Touched her up.. with a bit of Flash Red paint. About 6 stone chips in all. Looks ok as I can't see the scratches when I look at her now but I think the next wash/polish will smooth the paint in a bit better.

 

[Brettyboy]

Nothing

Was going to wash it but its just started pissing it down

 

[Mattyboy1]

put back all my interior now its all nice and dry

 

[Mattyboy1]

not today but the other day i carbon wrapped my gear surround. did try and put a pic on the other day but it didnt work so here it is.

and fitted

and this is a fair bit of the water that i wet vacced out my underlay. there was a lot more than this i cant believe just how much it holds.

 

[RaviR50]

I can see clearly now the halogens are gone i can see all the obstacles in my wayyy...

 

[domin8or]

Bought some 25 smd led sidelights .

You'll hardly need headlights with 25 Led's

 

[RaviR50]

Not today but yesterday i got the rears fly eye tinted and i got the filler flap snow camo wrapped not to everyones taste but i love it and people are gonna look at it no matter what

 

[RaviR50]

Does thst just apply to LCR versions or all LC's too ?

i belive this applies to all of the leons, UNLESS you have fitted aftermarket headlights that are projector styles or angel eyes ect.

 

[domin8or]

i belive this applies to all of the leons, UNLESS you have fitted aftermarket headlights that are projector styles or angel eyes ect.

Just for HID's though ?

 

[domin8or]

Not today but yesterday i got the rears fly eye tinted and i got the filler flap snow camo wrapped not to everyones taste but i love it and people are gonna look at it no matter what

+ on the Fly eye,- on the filler flap for me.

 

[RaviR50]

Sorry dont quite get what you mean. But if youre talking bulb size then yeah all are h7 that i know of

 

[domin8or]

Sorry dont quite get what you mean. But if youre talking bulb size then yeah all are h7 that i know of

Sorry,what i meant was are H7R type only in relation to HID units and not Standard bulb types ?

 

[RaviR50]

ah then yeah haha H7R is only with regards to HIDs. If you are looking for standard bulbs you'll be looking for just H7 bulbs

 

[domin8or]

ah then yeah haha H7R is only with regards to HIDs. If you are looking for standard bulbs you'll be looking for just H7 bulbs

Thank god for that,just bought and fitted Osram Nightvision's,thought i'd missed a trick LOL

 

[stupot_1982]

Thank god for that,just bought and fitted Osram Nightvision's,thought i'd missed a trick LOL

Just fitted Osrams nightbreakers for full beam/flash, they are a pair of belters. Decided to fit LED festoons all round, ordered 42mm, so they were a squeeze!

Decided to remove the rear L E O N and realised it was applied with superglue, so left with the remnants of that to deal with

 

[RaviR50]

Just fitted Osrams nightbreakers for full beam/flash, they are a pair of belters. Decided to fit LED festoons all round, ordered 42mm, so they were a squeeze!

Decided to remove the rear L E O N and realised it was applied with superglue, so left with the remnants of that to deal with

use some WD40 on the glue then get scrubbing, hard haha takes it off well though