A stage 1 is a flash stage 2 needs more work to set up mine makes 237 bhp and 247 lb/ft with standard smic
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Serviced it during the week .. and fitted a drilled and smoothed airbox with a pipercross panel filter for some better breathing and induction noise
Last edited:
Fitted my coilovers
Driven a few miles and analy measured the height of each wheel arch and adjusted to suit... Nightmare all 4 wheels are now within 5 mm of each othet i can live with that!
measuring anything anally sounds painful. (Sorry couldn't resist)
Had a busy day fitting
Eibach 25mm front arb
Polybushed wishbones & new ball joints
& gave it a oil,oil filter & diesel filter change
Eibach 25mm front arb
Polybushed wishbones & new ball joints
& gave it a oil,oil filter & diesel filter change
Last edited:
Law121
Guest
Changed oil and filter changed gearbox oil tyre pressures fitted a bov dumpvalve which was a fail
Replaced my broken TCS button with a 2nd hand one off fleabay. Got a new wheel speed sensor too fitting it tomorrow, hopefully that will sort the ABS out!
Cleared the sai fault code, again, despite having fitted 330 ohm, 10 watt resistors for my n112/249 delete?
And established a boost leak, 90 degree hose under Inlet mani... Perhaps that's why she peaks at 1.4 bar then drops to 0.7 bar again.
And established a boost leak, 90 degree hose under Inlet mani... Perhaps that's why she peaks at 1.4 bar then drops to 0.7 bar again.
Fitted a JR Filter, Serviced my 007p, changed my battery, fitted some leds to the low beams enabled auto-windows and fixed my rear washer which had a loose pipe just behind the Cigarrete lighter thing on the boot.
yesterday, gave it a quick machine polish and a wax looked really good. pics in a bit.
also got some smoked side repeaters, auto art ones they said it was for 99-05 leon but the bulb holders didnt fit in?? anyone had experience with that??
also got some smoked side repeaters, auto art ones they said it was for 99-05 leon but the bulb holders didnt fit in?? anyone had experience with that??
Stage 1 remap yesterday at AMD, and drove away with a massive smile on my face Then I went out and burned some V Power around Hertfodrshire.
Then I went out and burned some V Power around Hertfodrshire.
was yesterday but sorted my car out with ride hight not 100% happy so orderd camber top mounts washed the car as well
These to bring the front in and down
These to bring the front in and down
Similar threads
