MK3 Ibiza Cupra* K03s Jabbasport* Moving on....

[James.Judd.1]

Screamer pipe

Yer ive had a read up on the 2868 seems like a good option, quick spool with higher power output over the 60rs but from what ive seen its a lot more money.

Might look into it nearer the time but i wont be going any bigger than that though

I think 300-350hp with a diff etc would be quite a decent setup all round

Yeah 300-350 is what im going for, more than enough in a little ibiza.

Yeah I think his turbo can push 400-450 iirc and is fully spooled at 3500rpm which is nuts!

 

[Berg]

Yeah 300-350 is what im going for, more than enough in a little ibiza.

Yeah I think his turbo can push 400-450 iirc and is fully spooled at 3500rpm which is nuts!

Definately!

Yer they do look impressive tbh, definately worth looking into more

 

[James.Judd.1]

Definately!

Yer they do look impressive tbh, definately worth looking into more

Thats the turbo I am going to buy when I get bored of mine I was thinking about selling my hybrid and INA manifold and just doing it now lol

 

[Berg]

If your having those thoughts now it will save you alot of money in the long run!

 

[James.Judd.1]

My engine is just asking for a big turbo I just want the car back on the road now tbh!

 

[Berg]

Got back from the Nurburgring last night

Was an epic weekend thats for sure!!

My car survived and got there and back without a single problem too

Has gained a small knock on the drivers side but something small im sure

I really found out how crap my brakes, suspension, and standards sets are on track and i really want a diff now lol

Heres a few pics i scoured from the internet

 

[James.Judd.1]

Nice pics, glad you both made it back in one piece! Hope the noise is nothing expensive mate

 

[Berg]

Cheers mate, hoping its something like a ball joint or similar

Couple of others i was with had problems with there cars but everyone got back safe and sound which is good

Inspection tomorrow i think!

 

[Hartosh1]

Good to hear the car made it through with no problems mate also hope the knocking noise is nothing serious fingers crossed. The ring is something i will do eventually looks great fun!

 

[Berg]

Good to hear the car made it through with no problems mate also hope the knocking noise is nothing serious fingers crossed. The ring is something i will do eventually looks great fun!

Cheers mate, It is definately worth going

Im pretty sure its nothing serious, at worst it will be a shock, which doesnt bother me as im changing the coilovers soon enough.

 

[joehirth]

Something to check with knocks are the top mounts, a mate of mine just had the same problem, he replaced everything else first then realised it was a top mount.

 

[Berg]

Yer defo worth a check, just sorting my new daily out then ill have some real time to spend on the car without worrying about needing it etc

It sound like it comes from lower down tbh but ill juat have to check everything.

 

[spoons86]

Think I spotted you pal the the ring on weekend, I was in mine, was nosing round yours wen it was parked up on lidl car park, if that's the same one??
Keeping the trend going, my seat made it there, round and back with no probs aswel goodtimes all round.

 

[Berg]

Think I spotted you pal the the ring on weekend, I was in mine, was nosing round yours wen it was parked up on lidl car park, if that's the same one??
Keeping the trend going, my seat made it there, round and back with no probs aswel goodtimes all round.

Yer that was me mate

Had a look round yours too, looked really clean!

You were with ross and his 106? thats a mental car lol

 

[spoons86]

Cheers mate, yeah I am mates with the lads that built it for him, had a go in it around the mountain roads near the ring.. My god it shifts! 400bhp in a 106 ain't safe!

 

[Berg]

Going to be sorting the handling out over the next couple months, the plan of action is....

Weitec coilovers
Neuspeed 25mm front ARB
Neuspeed 28mm rear ARB
While im there im going to polybush the wishbones (May polybush some more bits later on)
Vibratechnics rear & g/box mounts
Solid front mount (guy on another forum mkes them)

After all of the above i think an LSD could be a good buy!

With the new setup im planning on lowering it around 40mm max so hopefully it should feel alot better with the above!

Anyone got any other opinions on what can be upgraded in that area?

 

[James.Judd.1]

It will be unbearable with both uprated rear mounts and a solid front mount! Appart from that sounds good, pretty much my plan of action for after xmas, going to polybush rear beam too but I have heard its a bit of a pita!

 

[GTi T]

Going to be sorting the handling out over the next couple months, the plan of action is....

Weitec coilovers
Neuspeed 25mm front ARB
Neuspeed 28mm rear ARB
While im there im going to polybush the wishbones (May polybush some more bits later on)
Vibratechnics rear & g/box mounts
Solid front mount (guy on another forum mkes them)

After all of the above i think an LSD could be a good buy!

With the new setup im planning on lowering it around 40mm max so hopefully it should feel alot better with the above!

Anyone got any other opinions on what can be upgraded in that area?

i'll be taking pics of my Brembo's this week and putting them up for sale properly if your still interested.....

 

[Berg]

i'll be taking pics of my Brembo's this week and putting them up for sale properly if your still interested.....

Ill check my funds wish i could have had them before i went to the ring, was just a bit risky in case something went wrong....which it didnt!

It will be unbearable with both uprated rear mounts and a solid front mount! Appart from that sounds good, pretty much my plan of action for after xmas, going to polybush rear beam too but I have heard its a bit of a pita!

Ill look into it a bit more but from what ive heard the fast road vibra technic mounts arent meant to be that bad vibration wise

 

[butch20vt]

love the pics mate