Did this the other day and everything was fine for a week or so, checked again and now the water i p~ssing back in from the passenger door.
Easy enough but a pain in the arse, going to remove the entire panel next time, couldnt get all the gunk out of the grooves in the door so the butyl wasn't seated correctly i think
did this today, really was not too hard at all! (thats saying something if i can do it!)
the seal especially round the speakers was almost non existent, put an extra run of butyl on the outside in that area just to be sure! took less than 2 hours to do all 4 doors
Cool. Did you use the guide, I've found it but the pics don't show up? Any chance you have the guide with the pics, I'm trying it next weekend, weather permitting?!
Cool. Did you use the guide, I've found it but the pics don't show up? Any chance you have the guide with the pics, I'm trying it next weekend, weather permitting?!
i pirinted the guide off with intentions of using it, but after reading it a couple of times it really wasnt needed. guide with pics are on page 33 of this thread
Anyone else had airbag sensor problems after this, I have repaired the seals and removed the crash sensor from the crossmember dried it out filled it with electric cleaner now need to wipe codes and retry it. Can you clear everything by removing battery?? I don't have vagcom or vcds
I have a leak and it looks like its coming in from above the throttle pedal. I take it that would be the wiring box that lee was on about. If so, whats the fix for this?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.