Nothing to the Leon itself but stripped some more off the new engine that I'm going to be rebuilding as a 2.0 stroker 
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Fitted my brembos and ds2500s yesterday (will be going out tonight to bed them in) and machine polished the car today to get rid of as much swirling as I can. Even got my very own 50/50 shot which I'm quite happy about. Just polish dust on the left.
Such a good job I can't even tell what colour your motor is! Tis a mirror, cracking work.
Sent from my HTC One X using Tapatalk
Fitted some ds2500's and she was treated to genuine oil and a filter change!
Sent from my iPhone
Sent from my iPhone
Fitted 3" Turbo-back cobra exhaust, decat, non res. Had a stage 2 map.. safe 282bhp/296lbft that day on that dyno, etc. Sounds epic.
Fitted a new CD player, carbon fibre wrapped th climate control and CD player surround looks a lot better now. Ordered 5 meters of blue vacuum hose to replace all hoses and started to make my drivers heater vent into a boost gauge pod, will keep me busy for a week or so, I'm after a new gear knob ,gaiter and surround but th surround has to be black anyone selling one?
not today but a few days ago, cobra non res catback
https://www.youtube.com/watch?v=PwB4oMx2cag
after a spirited drive home my mate said i spat flames, which is cool beans
https://www.youtube.com/watch?v=PwB4oMx2cag
after a spirited drive home my mate said i spat flames, which is cool beans
Fitted a new oil pump and turbo refitted the sump remove snapped dogbone mount bolt from the subframe just need to get an exhaust manifold now and refit the head
Replaced both front wishbones because the old bushes were shagged....nice and tight again now!
Did you get the tracking done afterwards
I've gotta do mine this weekend today as well as the driveshaft replacement so I can do the CV joint so I'll keep the standard driveshaft tucked away in case I have any problems. I was wondering whether it'd send the alignment miles out is why I asked
Also hopefully later on today I'm going to take the car to be plugged into VAG-COM and hopefully get the new CCM programmed in so some the features may work
Did you get the tracking done afterwards
I've gotta do mine this weekend today as well as the driveshaft replacement so I can do the CV joint so I'll keep the standard driveshaft tucked away in case I have any problems. I was wondering whether it'd send the alignment miles out is why I asked
Also hopefully later on today I'm going to take the car to be plugged into VAG-COM and hopefully get the new CCM programmed in so some the features may work
Yeah alignment is a must after replacing the wishbones, i just got a garage to do it, bought 2 brand new wishbones with bushes and balljoints for £35, £40 for fitting and tracking.
CCM programming takes minutes, managed to get one for £8 since my remote central locking was fudged on my old one.
I knew that the alignment needs doing but as me / brother are planning on getting it done today but the garage is likely to be shut by the time we got it done but I'm going to need the car to get the CCM programmed in obviously that's why I asked lol, I'll get the tracking done Monday I expect providing it's able to be driven
I've stayed OEM with it, I'm trying to get it to be sorted properly before I start tinkering, The only mods so far on it are a set of the later spec Starfish alloys / debadged it but that's it thus far lol
Today we've replaced the driveshaft and the wishbone as hoped and it tracks better than it did before although I'm not surprised considering the state of the wishbone bush
I've also discovered I need a few parts for the MOT in 3 weeks too though
Today we've replaced the driveshaft and the wishbone as hoped and it tracks better than it did before although I'm not surprised considering the state of the wishbone bush
I've also discovered I need a few parts for the MOT in 3 weeks too though
Fixed the rear door seals with the usual leaks (been needing done for a while now lol). Also given a look over underneath and decided its time to change the track rod ends and ball joints. Then last but not least I cleaned it inside and out.
i've gave it a wash this morning now it started raining again
I was up at 6.45 washed and waxed my car and was at work for 10 am yesterday
Similar threads
