Took mine out today with its new standard valve.
Definitely better than with the forge.
A lot quieter aswell.
So other than a slight note on idle and when flat out from the exhaust, its no different from standard.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Definitely better than with the forge.
A lot quieter aswell.
So other than a slight note on idle and when flat out from the exhaust, its no different from standard.
I really like the tssssshhhhht sound from my turbo smart so it’s going back on.
This is a picture of me
Sent from my iPhone using Tapatalk
I really like the tssssshhhhht sound from my turbo smart so it’s going back on.
This is a picture of me
Sent from my iPhone using Tapatalk
I see you swapped in the 100-speed gearbox?
Sent from my iPhone using Tapatalk
Manic172
https://m.facebook.com/ManicMotorsport1
That’s inaccurate mate vin diesel has more than 15.
And I got 100 gears and direct injection nos on a red button
seriously though that first film is amazing Sent from my iPhone using Tapatalk
That’s inaccurate mate vin diesel has more than 15.
And I got 100 gears and direct injection nos on a red buttonseriously though that first film is amazing
Sent from my iPhone using Tapatalk
"Warning!!! Danger to Manifold"
"Shut up!"
Floorpan falls out.
Wat...?
Sent from my iPhone using Tapatalk
Only when I got old enough and understood more did I realise why my dad called them bullshit
Sent from my iPhone using Tapatalk
Just ordered a forge charge pipe. Even though there's plenty of evidence to say they make no difference to performance. Minor ebay addiction me thinks...
So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!
Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.
Sent from my iPhone using Tapatalk
Black.
I viewed it the other day.
Got an Ebay message today to say i can have it fo £8 off so snapped it up ?
I viewed it the other day.
Got an Ebay message today to say i can have it fo £8 off so snapped it up ?
Ideal time if you're going loud stereo with amps and all that ?
So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!
Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.
Sent from my iPhone using Tapatalk
It's like Monty Python in that part - intake or exhaust manifold?Only when I got old enough and understood more did I realise why my dad called them bullshit
Sent from my iPhone using Tapatalk
African or European swallow?
If you've gone that far mate I'd throw in a selection of Silent Coat products, decent quality and cheaper than the bigger well known brands.
So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!
Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.
Sent from my iPhone using Tapatalk
I've used it on several cars over the years and my Leon is almost completely covered in it.
Sent from my SM-G986B using Tapatalk
Ideal time if you're going loud stereo with amps and all that
She’s already got components up front and a sub in the boot but will do some tidying to the wiring.
Sent from my iPhone using Tapatalk
Any recommendations on products and places to read about installation etc? Don’t really fancy putting all the old insulation back in but it’s fairly thick so guess it needs to?
Sent from my iPhone using Tapatalk
Also anyone know the best adhesive to put the door seals back in with?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Also anyone know the best adhesive to put the door seals back in with?
Sent from my iPhone using Tapatalk
Butyl tape mate. Looks like a big roll of black liquorice
Sent from my iPhone using Tapatalk
Even for the external weather strip and not the internal door plates?
Sent from my iPhone using Tapatalk
Similar threads
