fitting

  1. Ibiza 130 tdi

    312mm disc fitting guide?

    Hey guys! Long time no thread! ;) I have searched as I know Gazjones had done a 312mm fitting guide, how easy is it to change the discs? Is it just a case of normal discs or is it like some of the newer cars where it's all part of the bearings? Hopefully it's just like the old school...
  2. Nef

    Fitting ABS sensor wire, Drivers side front

    Found out the other day that my tyre has worn throught the wire, so have now bought another wire, just wondered how hard it is the change over? thanks.
  3. PH1L NI

    Hottuning / Ta Technix Coilovers - Fitting problems?

    Can I please, please, please make a plea to anyone on here considering purshasing this crap to please don't! I know it seems good that you can get coilovers + droplinks sent right to your door for under £300 but in reality it will end up costing you alot more. I've have mine in for 2...
  4. Ethan040

    My guide on fitting a cd player under your steering wheel.

    Hey, i had a good search of the site and found no threads on installing a cd player under the steering wheel so i thought id have a go without one and make a guide myself :). Heres a pic of it installed... Things you need.. Wire strippers or a stanley knife. some wire the same thickness as...
  5. Aux port fitting

    Anyone know if I can fit the Aux port into my Ibiza. Come in newer models and I got one ages ago from srappies, need to know if I could wire it In and use it for my iPod, headunit is an alpine 9886r , iPod support doesn't work on iPhone so this would be ideal if it could be done
  6. 1.8t Induction Fitting Guide

    hi guys i have just purchased an raid hp induction kit. my question is this, there is a breather pipe running from the engine to the airbox, once i have fittet the cone filter what should i do with this pipe, could it just go to atmosfear. thanks David
  7. ScoobyJawa

    Fitting Strut Brace

    What size length bolts do I need to go through the brace, strut tower and have room left for a nut but without being too long? Ta :)
  8. Ibiza125

    K03s fitting issues

    Ok so I am finally getting somewhere with the fitting! Just got the TIP to go on as I was just trying to get it on without cutting any off of it. But my problem is that when I took the K03 off, there were 2 vacuum pipes going to the actuator. Now on the K03s there is only one connection. What...
  9. Spud_G40

    Box off, fitting new paddle clutch + flywheel...advice...

    Hey guys, been taking my gearbox off my car the last couple of days to fit a new clutch and flywheel with 72k on the clock it ain't too shabby considering its been least remapped for at least the last 25k-30k miles, finally got the box off today with my mate after a lot of fighting lol, tight as...
  10. Rob GTI

    Fitting Milltek

    Bought a MIlltek downpipe and sports cat from another forum member to fit to my existing milltek cat back. However the connecting pipe that came with the DP won't fit into the sleeve of the non-res section I have as the connecting pipe diameter is too big. The p/n's are all correct...
  11. oil pressure gauge fitting guide

    looking to fit a oil pressure gauge, was wondering if anyone had a guide on this. 2002 lc
  12. ARB Fitting

    Now I have fitted my rear strut brace, and waiting to do my front lower, I'm looking at now saving for front and maybe rear ARBs.... Anyway, I was wondering how easy these are to fit? Or would it be easier to get my mate to do them? (he's a mechanic).... Looked on in "info base" and could...
  13. induction kit fitting...

    Looks like i'll be putting an induction kit on my 1.6 sport. read the induction kit fitting guide which was v.helpful but thinking i may do it slightly differently. firstly how good are the filters? seems pointless putting a cheap one on if it's going to be awful at filtering the air. once...
  14. artemis_1991

    Gearbox Dying! - Fitting questions

    Im in need of some help, my 1.4 has developed a type of whine mainly in 3rd and 4th but also in 5th. when its sitting in neutral and is revved there is no noise, but im not sure if this is due to the engine not being under load or because the gearbox is in neutral. Its mainly at mid revs on...
  15. torquesport

    Spring fitting

    Got my new springs today managed to get the strut out with a bit of hammering but now cant get it in the hub, Any ideas how to get the bugger back in??
  16. fitting remote central locking

    I have a 98 Arosa MK1. It has central locking/electric windows and I have bought an item that makes it Remote! and also has a window closure unit. Now I dont have the foggiest where to locate the wires to hook this up.... any help appreciated. :-) Iv read alot on here about how the arosa is...
  17. elliott87

    fitting front and back ARB's

    got some arb's yesterday. Just wanna know if they are just bolt on or if they are a pain in the ass to fit?
  18. Timm

    After fitting coilovers, advice?

    hi Guys i fitted some coilovers yesterday and have got a couple of questions for the people that have fitted them ... when put in the new coilover i was unable to put the anti roll bar back into its original place, as you know there are two fitting either side but does it make a difference if...
  19. Forge Upper Hoses - Anyone had fitting Problems on LCR?

    Hi All, Recently fitted some new upper hoses on my LCR (Kit: FMK008). I had a real mission installing the one between the inlet manifold and the MAP sensor pipe. I had to cut it down because it was much longer than the original hose and then it would not go over the inlet manifold. I...
  20. ill fitting driver's door on my Leon.

    On my Leon the drivers door doesn't seem to fit properly. When its shut, from the outside you can see that the window half is slightly out of line and sticks out a little bit but the bottom half is perfect. This causes quite a bit of wind noise when traveling at speed as you can imagine, it...
Chris Knott Insurance - Competitive quotes for forum members