log

Hey folks, As I see a SCN sticker on the back windscreen of my car, the previous owner must have been on here, but im not sure how I could find them to ask, so thought i'd try logging block 011 on VAG COM last Friday evening, on a 3rd gear run from 1500rpm to redline. Im not sure if i've...

Taught i do some logs since i was out :p Mods Amd stg1 map, fmic, FIP, super sprint full exhaust/decat pipe, ko3s No matter what i do, i wont let me creep past 1bar, as it hits limp mode. :doh: Group A: '003 Group B: '115 RPM Mass Flow Load Ign. Timing RPM Load Absolute Pres...

hi all, would like some of you guys to take a look at some logs i did today. bare in mind i only have the download version of vag com so cant get all the blocks yet. but here it goes first one i did this morning, 3rd gear Friday 19 March 2010 08:14:15 06A 906 032 MJ 1.8L...

I have picked up a shareware version of VAGcom and cable from the bay. No fault codes read so that's a bonus! I'm just up for experimenting with logs right now, maybe find out how the car is running under boost and the effectiveness of the SMIC at the moment. So, 2 questions really: 1...

This might get moved to the VAGcom section but I thought I would consult the vast knowledge of the the Mk4 Ibiza family first. I have picked up a shareware version of VAGcom and cable from the bay. No fault codes read so that's a bonus! I'm just up for experimenting with logs right now...

hey guy's having a disscussion on another forum. has anyone done real world logs, not dyno to show the difference on the 1.8t engine for the std airbox, uprated filter or open cone, to show intake temps higher gs etc?

Hi all, I did a log of my maf and turbo boost this morning (4th gear). I have always suspected that my car has been re-mapped and looking at the actual boost it seems that i am correct. Can anyone confirm this. Sorry if i have pasted it in wrong. cheers rob...

Ok, this is a log with measuring blocks 115 and 031, 115 is Engine Speed, Engine Load, Spec Boost and Actual Boost. The spec boost and actual boost are measure in mbar but at the risk of sounding a bit thick, what do these figures relate to in terms of psi/bar? In real terms in this log I...

Leon 4X4 1.8T the intake temp is very high (55 celsius, on K03S), can someone help me understand why? the intercooler is visble, and have alot of air. as you can see

Just done a MAF log while driving round my estate, at 5400 revs the mass air was 150.81 does this sound about right? Can post the log if anyone wants to see it

Skahigh and I put vag com on the car last night, as its been acting strange recently When planting it, it seems to fluctuate, and the power delivery is no longer smooth. My logs were peaking at 185 g/s But his logs were up in the 200's which made us think the MAF may need replacing...

Ran the car the other week at RS Tuning RR day and it only made 186bhp. Now I know there is the old dyno lottery but I was first on at 10am and last time on the same rollers I made 173bhp with out the APR stage 1 and CAT back system. I was expecting around 205-210bhp maybe more if I was lucky...

Hey All, I did some quick logs today, 4th gear runs, everything looks ok but block 020 has me confused, Can someone look at the below log for me and tell me if the cyclinder timing is to much and what is normal, please bear in mind my ECU is remapped. Thanks in advance. Group A: '118...

As title suggests, how do i do this, numpty guide if possible as I'm new to using vag-com. cheers Lee

Hey folks, in my quest to see if the clutch is slipping / car slower than normal, I thought i'd get a friend to log Block 002, Block 115 and Block 118 to see if I had missed the obvious...The MAF, but as Vag-Com showed no errors, I remember on my last Cupra, the MAF sensor went but never showed...

This is following on from another thread (link at the bottom) but could I get some opinions on the following logs. I've been told I should have at least 300bhp but the car doesn't seem much quicker than when I was on the standard turbo with APR stage 2 and the logs are showing a gain of around...

I'm just continuing my Project/Work log here. So to say, I really like modding the little bits! "A Seat Toledo, (Black) Non-facelifted Model, and I think it's year 2003. My dad bought the car for me to use my daily college journey. With 110,000km on the mileage, I think it got alot of things...

The idle on my Ibiza Cupra 20vt dips down every now and then usually after taking it for a drive then stopping for a while. dealer replaced MAF sensor but it hasn't made a difference and its now out of warranty. Can anyone give me some advice on which blocks I should log to check if the...

Hi peeps well collected my LCR (210) 2 weeks ago now and apart from a few neglected areas by the pair of half brainers who used to own it, ive gotta say im more than chuffed with it ;) I seem to have a spuradic problem with the throttle every now and then the engine will give a fairly violent...

Hi, Just this week picked up my facelift cupra and have been playing logging to see if it's healthy. Unfortunately the logs are not here with me now but i can give rough figures. MAF seems to be reading around 150g/s, with one at 152g/s max. Timing retard seems to be pulling upto 5...