Leon Cupra N249 bypass pic?

[cupradan]

Can anyone who has done the N249 bypass on an AUQ Cupra stick a pic up on here for me? I've been reading the various guides for bypassing it on Ibizas as its supposedly a similar layout but my engine doesnt look the same.

Cheers

 

[adam cupra 20vt]

Here

http://www.seatcupra.net/forums/showthread.php?t=195511&page=5

 

[cupradan]

good stuff cheers mate

 

[drue1]

does anyone have a pic of before the n249 mod was done as i cant even find this n249 or a pic would help to what im looking for.i took the box off from coil pack number 4 and blocked off the hole in the pipe .will this be ok ??

 

[LEE69]

does anyone have a pic of before the n249 mod was done as i cant even find this n249 or a pic would help to what im looking for.i took the box off from coil pack number 4 and blocked off the hole in the pipe .will this be ok ??

yes just block the hole, and run the feed for the dump valve from a T'd piece of the inlet manifold stub, or off the FPR.

 

[drue1]

cheers i did mine today and must say does feel better and dv and flutter sounds louder
one other thing lee69 the hole i blocked off from the black box over number 4 coil pack can i use that pipe for my boost gauge when i get one ??

 

[LEE69]

Yeah you could do, or T into the FPR like this.
this is before i did the by-pass myself.

 

[drue1]

Yeah you could do, or T into the FPR like this.
this is before i did the by-pass myself.

same colour blue pipework i bought as im going all blue under my bonnet
cheers fella