Also noticed my inner CV boot had split too
Luckily i came up with another "special" repair
we'll get that spare driveshaft on there at the weekend
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Luckily i came up with another "special" repair
we'll get that spare driveshaft on there at the weekend
Cheers Wilz, you got round to fitting yours yet?
I was aiming to go hybrid this year, but a trackday has come up and i've also realised i need to upgrade my intercooler so i've postponed it for a while. I've got the high flow manifold now, along with the LCR TIP and 80mm MAF. Just the intercooler, fuel pump, injectors, turbo and mapping to go
Like i said mate, health and safety would of had fun watching us fit it all back on! The bolts were the bit that annoyed me the most.
Luckily i came up with another "special" repair
Cheers mate, i'll dig it out of the shed at some point this week and see what condition it's in.
You know what i'm like with my grinder/hammer, scaffold polei'll make anything fit!!
Grinding we were kind of expecting after previous reports, it's the bolts that pissed me off
Granted, but still not the point!
http://www.youtube.com/watch?v=0Lk3R_AlZfU
Still cracks me upto this day
Granted, but still not the point!
http://www.youtube.com/watch?v=0Lk3R_AlZfU
Still cracks me upto this day
That is true, you'd expect some kind of modification to have been done or atleast a warning to check certain things before you try and fit, especially with the previous fitment issues/reports.
I should get my scooter video hosted up
No real updates on the car recently as i'm now saving for a house.
I went to Cadwell Park back in November, and, apart from boost hoses keep popping off, was really pleased with how the car performed. The high flow manifold is definately doing it's job, and is keeping exhaust temps a lot lower than the standard manifold was. The diff definately helps getting the power down out of the corners and i'm now really looking forward to the BHP Show at Lydden in May where it'll be on track again.
A few of many pictures from Cadwell:
I've got a few little things planned for 2010, but it'll mainly be maintaining the car and hopefully getting the rusty tailgate sorted!
A few snow pics of a very dirty Ibiza:
I went to Cadwell Park back in November, and, apart from boost hoses keep popping off, was really pleased with how the car performed. The high flow manifold is definately doing it's job, and is keeping exhaust temps a lot lower than the standard manifold was. The diff definately helps getting the power down out of the corners and i'm now really looking forward to the BHP Show at Lydden in May where it'll be on track again.
A few of many pictures from Cadwell:
I've got a few little things planned for 2010, but it'll mainly be maintaining the car and hopefully getting the rusty tailgate sorted!
A few snow pics of a very dirty Ibiza:
Last edited:
the track pics look amazing
Cheers
The top two were taken by the circuit professional photographer. They charge £30 for all of the shots of your car from the day. The one of mine and Ben's was taken by a friend.RubenD
Guest
I really like your engine swap, but wouldn't a Audi TT 225bhp motor be more interesting as I think this will have cost a lot too?
I still think about getting coils for my Cupra (have them on my 16V Golf and love them).
I still think about getting coils for my Cupra (have them on my 16V Golf and love them).
scorker
Guest
It was easier just to get a whole Mk3 Ibiza and stick it all it. If i'd gone for the 225 TT lump then i would of had to find the loom etc... seperately. Much less hassle doing it with the full car. I can always change the turbo when i need more power
scorker
Guest
Managed to pick up some new wheels and brakes
Hi just a quick question what wheels are these?? Probs seen them before but i cant name them??
Ah thanks i thought it was those was just having one of those thick moments, are these direct fitment as ones iv found are slightly bigger stud diameter
Yep they are a direct fitment, no spigot rings required and the standard bolts are used. The bolts with the radius seats.
I have a set of those wheels on my 1.4.
awesome am looking at a set at the moment just waiting for the bloke to get back to me, they should be direct fit too
Similar threads
