Removing engine cover From Leon FR 2.0 tfsi '07 and dyno day pics

[elDuke]

Hey Guy I Need To Remove The Engine Cover To Connect The Rpm Cable Of The Dyno I We Couldn't Revome It ......... Does Anyone Knows A Guide How To Remove It, Pics Or Something a link......................really Thanks

Here Are Some Pics Of My Friend Ibiza Cupra On The Dyno......................









this is the rpm cable that i need to connect

 

[ZBOYD]

Just give it a hard tug. Its held on my pegs/pins that fit into rubber grommets.

You simply give it a hard pull up and it comes off the grommets. You won't break it. I had to do it today with my Cupra.

To put it back just line the engine cover back up, pegs/pins into the rubber grommets and give it a firm push down to fit it back in place.

Be aware though that the Airbox is part of the engine cover, so they will have to attach their wire then put the cover back in place and re-attach the hoses.

 

[leviathan18]

in the neuspeed site there is way how to remove it as zboyd said its just force

 

[elDuke]

ok mates thanks

 

[elDuke]

i allready try to do it with neuspeed manuals and i couldnt,,, here are some pics

its my engine cover diferent???????

here are some pics









i think the cover its attached to this

 

[ZBOYD]

Same as mine, unclip the main intake hose at the back of the cover. pic 3 of your pictures above.

Then give the whole engine cover a hard tug. I mean hard tug, it will take some effort. But it's designed to pull off.

 

[DanGB]

hard tug means - all your strength.

 

[elDuke]

Finally

FINALLY ......... I THINK I WAS AFRAID OF BROKE SOMETHING UNDER THE COVER THANKS GUYS ...............THEN I COULD'T ATTACHED THE COVER BUT I JUST APPLIED SOME OIL ON THE RUBBER GROMMETS AND ITS EASY TO FIT THEM.

MAYBE ANOTHER ADVICE FOR THE FUTURE IS THAT YOU HAVE TO ANALYZE WERE ARE THE GROMMETS TO KNOW WERE TO PULL, THIS WILL ELIMINATE THE NOISES OF YOU BRAKING SOMETHING.

HAHAHAHAHA

THANKS FOR THE HELP

SOME PICS I LOVE TAKING PICS...................