Seat Leon Useful Part Numbers listing for Modifications

CupraR Kier

Guest
does anyone know the part no.for the front arm rest for 53 plate leon
 

Boz

LSE 16v
Feb 4, 2007
82
0
Wiltshire
im doin my nut trying to find the part number for the smaller (square) hazard light switch as ive jus fitted a silver (cupra?) centre ot my Leon SE, and the hazard switch is smaller as its separated form the cup holder and rear screen switch.

help! ;)
 

Pabs

Active Member
May 3, 2004
5,936
4
Basingstoke
I THINK these are the part #'s for the Armrest :

1M0 864 245N - armrest lid - but you need to choose the right colour/fabric
1M0 864 207B 40N - Armrest - persia Black - approx £175inc Vat

You'll also need the following parts if you haven't already got an armrest fitted:
N 907 287 01 - torx socket
1M0 035 599A - rd. connector sleeve housing


This is only what i THINK - i am quite possibly wrong.
HTH
 

andycupra

status subject to change
is it possible to put the twin intercoolers of the cupra r on to the cupra?:wtf:


not really.

the LCR intercoolers are slightly smaller, have the inlet /outlets in different places and as siad before the inlet manifold is the other way around. (is the cupra intake is on the off side, the LCR nearside.

however anything is possible. it just wouldnt be easy.
 

tompotts

Touch me in the morning!
Mar 17, 2007
269
0
Hi guys, Im in desperate need of a part number.

The number I need is for the silly little clip screw things that hold my engine cover on. Ive got a cupra engine code AUQ.

If anyone could help it would be fantastic since getting to the Seat dealer is a logistic nightmare between 4 and 5 and the vw dealer wont even talk to me without a part number.:headhurt:

If anyone could help me out it would be greatly appreciated. :)

Loads of thanks in advance!

[B)]
 

DANMIT

Guest
Could someone point me in the direction of the part number for a MAF sensor for an 03 LCR

Cheers

Dan
 

funkymunky1983

Guest
my dads got a 225 cupra r hes just put an induction kit on it and the management light came on can u tell me why thanks funky
 

Pabs

Active Member
May 3, 2004
5,936
4
Basingstoke
you've posted on the wrong thread mate. Best start a new one.
Possibly killed the MAF when the kit was installed, or perhaps the filter is too oiled which has killed the MAF?

Ask on a seperate thread - you'll get a better response.
 

Pabs

Active Member
May 3, 2004
5,936
4
Basingstoke
Thats it now...

I've given up ALL-TOGETHER with the Skoda Fabia Wiper part #s.

For the last several months, I have been receiving PM's, or emails, or IM's, to tell me that my #'s are WRONG and so I change them.

They are continually being swapped over - so I've now removed them all together.

You'll find plenty of useful (or not) posts on these here forums - buy the parts YOU think are right - and don't ask me because I won't tell you.

Sorry for the attitude, but it's just been annoying me for so long now.
 

cordobabrendy

FOOORRREEE!
Aug 24, 2001
7,642
1
belfast
Easier just to buy a complete one from wolfsburg parts on ebay! pabs dont worry about it, we all know its one of the most important subjects in life, right up there with wooshy dump valves. Some people need to get out more.
 

Pabs

Active Member
May 3, 2004
5,936
4
Basingstoke
hehe... i'm not worried about it mate - just glad i actually thought about removing the numbers from my list - no more bugging now :)
 
Progressive Parts, performance parts and tuning specialists