SeatR's Mk3 Ibiza Top Sport 1.8T (FMIC bought!)

[tarzan]

show some piceture of the engine bay!!

 

[partom02]

Big brakes

 

[SeatR]

Lights

Got my Led's from ultraleds.co.uk and fitted

Fitted 50W Halogen reverse lights

and got my 6000k HID's yesterday. going to assembly the kit to day

got a few pics of the sidelight led's and the Map\passenger light etc.


my blanking plate:

My 100w h7 foglights:

4mm vacumtube, Done n249&n112 bypass, pics comes later:

Some frosen mouse:

they used enough stamps yes ;D

 

[Ibiza 130 tdi]

What do you need the frozen mice for?! More power?

 

[SeatR]

yeah more power micepower

 

[SeatR]

update!

My rims came today! and the HID lights are mounted !

Didnt have the time and patience to find a good place for the ballasts. so just mounted them temporarly.

And a few pics of the n112&n249 bypass

Xenon on left side.

 

[tarzan]

nice were did you by the 4mm red wakcum lines from?you did use resistores when you did the n249,n122 and sai?

 

[Reuvers]

nice mate.

maybe fit a TIP on there? You'll love the sound!

 

[SeatR]

nice were did you by the 4mm red wakcum lines from?you did use resistores when you did the n249,n122 and sai?

did not use resistor on SAI. did not get any CEL's only improper flow code

n112 n249 is only bypassed for now as u see

i can give u the link for vacuum tube as i found it on ebay

 

[SeatR]

4mm silicone 4meter 2mm wall

 

[tarzan]

did not use resistor on SAI. did not get any CEL's only improper flow code

n112 n249 is only bypassed for now as u see

i can give u the link for vacuum tube as i found it on ebay

thanks mate.are you going to use resistores?

 

[SeatR]

yes im going to use resistors on the valves when i remove them not sure where to order from

 

[tarzan]

yes im going to use resistors on the valves when i remove them not sure where to order from

tell when you find out so i can order some toyou got link to were you get the blanking plate from?

 

[Reuvers]

seatR i thought I told you which ones in your other thread?

 

[SeatR]

yes im sure to go for the 10w now

 

[SeatR]

nice mate.

maybe fit a TIP on there? You'll love the sound!

will i get more spooling sound by changing the tip?

but does the k03s tip fit the k03? as im surely going to fit a bigger turbo lateron

 

[SeatR]

got my forge 007p valve today! but the hose from DV to boost pipe was cutted, as they've mounted a BOV.

anyone know how big ID this hose is ? and what hose is best to replace it with

 

[SeatR]

my new 9x16 wheels

 

[SeatR]

i realy realy want these set of floor mats

 

[SeatR]

here are my old rear discs, they realy just fell apart when taking them of

new braided lines

new 280mm rear discs

new ECS lightweight pulley