-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
Cheers for comments,still toying with new wheel colour
no chance to do front splitter today due to the weather,too wet to stay out after doing exhaust.as I said previously the exhaust had been quite low and wobbly so sat the backbox on my jack and unbolted the mount,sagged to say the least.
decided to cable tie the mount to make it tighter.then refitted mount then cable tied mount to bracket on the exhaust to raise it further,really hapy with how it sits now.
heres how the modified mount looks
may sit wonky like that with it cabled tied down but when on sits nice and straight.
was
now
apologies for poor quality pics,it was raining hard and i had my phone on me only
definate improvement although id like it to sit higher but the box would be touching the boot floor
no chance to do front splitter today due to the weather,too wet to stay out after doing exhaust.as I said previously the exhaust had been quite low and wobbly so sat the backbox on my jack and unbolted the mount,sagged to say the least.
decided to cable tie the mount to make it tighter.then refitted mount then cable tied mount to bracket on the exhaust to raise it further,really hapy with how it sits now.
heres how the modified mount looks
may sit wonky like that with it cabled tied down but when on sits nice and straight.
was
now
apologies for poor quality pics,it was raining hard and i had my phone on me only
definate improvement although id like it to sit higher but the box would be touching the boot floor
Last edited:
Like it a lot mate, just got myself a black lcr and the exhaust sits a bit low too so will have a look and see if what you did will solve it
just make sure you use quite thick cable ties as the exhaust is quite heavy.
5mm wide were the ones i used.
4 on the mount (2 to each leg) then 3 on the exhaust bracket to rubber mount
Deleted member 19366
Guest
I had the same prob with my exhaust, but I used a 70mm jubilee clip worked a treat been on there for 3yrs. Its a shame no companies have made uprated mounts like they do for other cars![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
i dont understand why so many manufacturers use rubber mounts?well i do cos it allows the heat to dissapate but surely a metal mount with rubber points where the exhaust would mount would be ideal.same design as current one but metal then where exhaust a attaches a hole with a rubber surround?
was gonna book my car in today with p-torque but didnt have a chance today then on way home my clutch pedal collapsed,straight to the floor!been told by AA i need a new pedal and the mount that holds it in place 
hes rigged me up a temp jobby-proper custom made stuff but its not gonna hold for long-anyone know of anyone selling a clutch pedal?!?!
hes rigged me up a temp jobby-proper custom made stuff but its not gonna hold for long-anyone know of anyone selling a clutch pedal?!?!woop woop back on road
got the clip from seat- for free!
and then my welding done-for free!
so smiles all round from me
fitted my pedal and just need to fit the spring back in again as when i first fitted it it clicked everytime i pressed the pedal down
currently having my warranty work done (which was due 3 months ago)
and then its back to its finest
on with the modding
got the clip from seat- for free!
and then my welding done-for free!
so smiles all round from me
fitted my pedal and just need to fit the spring back in again as when i first fitted it it clicked everytime i pressed the pedal down
currently having my warranty work done (which was due 3 months ago)
and then its back to its finest
on with the modding
looking dirty as hell atm but have the next few days free to sort that
side reps and silvatec style rear and side rep bulbs came from body-kit,cant rate them enough they have always been top dollar,very reliable.abc side reps,good quality too.
the stealth look is coming on nicely
much better
quick question also,whats the standard badges that come on the cupra r as i have just the cupra r one?
should there be a 20vt one or that just one ive seen on a few thats been added?just curious as they are all gonna come off anyway
side reps and silvatec style rear and side rep bulbs came from body-kit,cant rate them enough they have always been top dollar,very reliable.abc side reps,good quality too.
the stealth look is coming on nicely
much better
quick question also,whats the standard badges that come on the cupra r as i have just the cupra r one?
should there be a 20vt one or that just one ive seen on a few thats been added?just curious as they are all gonna come off anyway
Last edited:
had chance to fit front splitter today, a lot easier than it looks!
other than that the car is a mess on the front bumper-fly fest on it but cant clean it in this heat!
if anyone wants a battered and cracked splitter for free collected you can have it no problem
debadged rear end/front wings and also smoked side repeaters are on
2nd one is also a better quality pic of the recently raised exhaust
off to performance torque now
other than that the car is a mess on the front bumper-fly fest on it but cant clean it in this heat!
if anyone wants a battered and cracked splitter for free collected you can have it no problem
debadged rear end/front wings and also smoked side repeaters are on
2nd one is also a better quality pic of the recently raised exhaust
off to performance torque now
Last edited:
got back from p-torque yesterday at about 6.30 in the end-m6 FTL!!
Found out i had a faulty MAF and the fact that it was 28c and 40% humidity i ran 196bhp standard!
after remap ran 225bhp,disappointed with the figures but its all paper to be honest as i can feel a definate improvement in performance.
bought a new MAF today- £52.07 on exchange.all fitted and will be back down to p-torque when weather is better
next is a big clean as its awful at the moment and new brakes next month
Found out i had a faulty MAF and the fact that it was 28c and 40% humidity i ran 196bhp standard!
after remap ran 225bhp,disappointed with the figures but its all paper to be honest as i can feel a definate improvement in performance.
bought a new MAF today- £52.07 on exchange.all fitted and will be back down to p-torque when weather is better
next is a big clean as its awful at the moment and new brakes next month
Similar threads
